{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"IRFS3107TRL7PP","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"IRFS3107TRL7PP","canonicalUrl":"https://icboms.com/infineon/IRFS3107TRL7PP","factsUrl":"https://icboms.com/api/mcp/products/IRFS3107TRL7PP","rawCanonicalId":null},"summary":{"shortDescription":"IRFS3107TRL7PP, HEXFET® N-Channel MOSFET, 75 V Vdss, 240 A Id, 2.6 mOhm Rds(on) at 10 V, 240 nC Qg, D2PAK-7, -55 to 175 °C.","salesMarkdown":"## 75 V, 240 A — the switching MOSFET for high-current rails The IRFS3107TRL7PP: The 2.6 mOhm maximum Rds(on) at Vgs=10 V and 160 A sets the conduction loss floor for high-current switching stages. ## 2.6 mOhm Rds(on) — conduction loss floor At 160 A drain current and Vgs=10 V the maximum on-resistance is 2.6 mOhm. That 2.6 mOhm at 160 A means 67 W conduction loss at 25 °C junction — the 370 W package dissipation limit gives headroom for switching loss, but only if the heatsink keeps Tc below 100 °C. The die is sized for this current density; the limiting factor is the D2PAK leadframe's ability to sink heat into the board copper. ## 240 nC gate charge — driver current budget Total gate charge at Vgs=10 V is 240 nC. At a 50 kHz switching frequency the average gate-drive current is 12 mA; at 100 kHz it doubles to 24 mA. The 9200 pF input capacitance at Vds=50 V means the driver must source a 9.2 nF load per switching edge — a standard totem-pole driver with 2 A peak output handles the transition in roughly 100 ns, but the 240 nC total charge sets the gate-loop energy per cycle. The junction temperature spans -55 °C to 175 °C, so this part handles avionics cold-soak and under-hood engine-bay ambient without derating at the low end. ## D2PAK-7 footprint — not the standard TO-263-3 The package is a 7-lead D2PAK (TO-263-7) with six leads plus the tab. The extra leads are typically multiple drain connections or Kelvin source — they reduce package resistance and improve current sharing. The PCB land pattern must match the 7-lead footprint; a standard 3-lead D2PAK pad layout will leave the outer pads unconnected. Surface-mount assembly with the large tab requires a solder-paste stencil that covers the exposed pad for thermal transfer.","metaTitle":"IRFS3107TRL7PP N-Channel MOSFET, 75V 240A, 2.6 mOhm Rds(on)","metaDescription":"IRFS3107TRL7PP HEXFET N-channel MOSFET, 75V Vdss, 240A Id, 2.6 mOhm Rds(on) at 10V. D2PAK-7 lead, -55 to 175°C.","metaKeywords":null},"attributes":{"series":"HEXFET®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":[],"specifications":{"Series":"HEXFET®","Package":"Tape & Reel (TR); Cut Tape (CT)","FET Type":"N-Channel","Vgs (Max)":"±20V","Technology":"MOSFET (Metal Oxide)","Mounting Type":"Surface Mount","Package / Case":"TO-263-7, D²Pak (6 Leads + Tab), TO-263CB","lifecycle_stage":"eol_hot","Vgs(th) (Max) @ Id":"4V @ 250µA","Operating Temperature":"-55°C ~ 175°C (TJ)","Rds On (Max) @ Id, Vgs":"2.6mOhm @ 160A, 10V","Power Dissipation (Max)":"370W (Tc)","Supplier Device Package":"D2PAK (7-Lead)","Gate Charge (Qg) (Max) @ Vgs":"240 nC @ 10 V","Drain to Source Voltage (Vdss)":"75 V","Input Capacitance (Ciss) (Max) @ Vds":"9200 pF @ 50 V","Drive Voltage (Max Rds On, Min Rds On)":"10V","Current - Continuous Drain (Id) @ 25°C":"240A (Tc)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.73","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$4.82000","currency":"USD"},{"qty":10,"price":"$4.05100","currency":"USD"},{"qty":100,"price":"$3.27730","currency":"USD"},{"qty":800,"price":"$2.91316","currency":"USD"},{"qty":1600,"price":"$2.49439","currency":"USD"},{"qty":2400,"price":"$2.34874","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/c619c4201f14ba617d40ea38f5908b18.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can IRFS3107TRL7PP replace IRFS3107PBF?","answer":"Both are 75 V N-channel HEXFETs in a D2PAK package, but the TRL7PP suffix indicates a 7-lead variant versus the standard 3-lead PBF. The pinout and PCB land pattern differ — the 7-lead part has additional drain or sense connections. Verify the pad layout before substituting."},{"question":"What package does IRFS3107TRL7PP use?","answer":"It uses a TO-263-7 (D2PAK) surface-mount package with 6 leads plus a tab, also described as a 7-lead D2PAK."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/IRFS3107TRL7PP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/IRFS3107TRL7PP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}