{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"IRF7465TRPBF","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"IRF7465TRPBF","canonicalUrl":"https://icboms.com/infineon/IRF7465TRPBF","factsUrl":"https://icboms.com/api/mcp/products/IRF7465TRPBF","rawCanonicalId":null},"summary":{"shortDescription":"Infineon HEXFET® N-Channel MOSFET, IRF7465TRPBF, 150 V Vdss, 1.9 A continuous drain, 280 mOhm Rds(on) at 10 V, 15 nC gate charge, SO-8 package, -55 to 150 °C.","salesMarkdown":"## 150 V N-channel in an SO-8 — where the rating limits bite It targets 48 V to 100 V bus rails in DC-DC converters, flyback supplies, and load switches where the board area is tight and the thermal path runs through the PCB copper. ## Rds(on) at 10 V — the gate drive floor The 280 mOhm maximum on-resistance is specified at Vgs=10 V and 1.14 A. That 10 V drive voltage is a hard requirement — this is not a logic-level FET, so a 5 V PWM output from an MCU will not fully enhance the channel. The gate threshold is 5.5 V maximum at 250 µA, but the Rds(on) is only guaranteed at 10 V. Gate charge is 15 nC at 10 V, which keeps the drive current modest — about 1.5 mA per 100 kHz of switching frequency. A standard PWM controller with a totem-pole output can drive this directly without a separate gate driver IC in most designs up to a few hundred kilohertz. ## Thermal budget in an SO-8 — the copper is the heatsink The maximum power dissipation is 2.5 W at 25 °C ambient, but that number assumes a standard FR-4 board with minimal copper. In practice, the SO-8 package relies on the PCB copper pour on the drain pads to conduct heat away. For continuous loads above 1 A, a 1-square-inch copper area on the top and bottom layers is the baseline to keep the junction below 125 °C. The junction temperature range is -55 to 150 °C, which qualifies the part for industrial environments and automotive under-hood zones where ambient heat can exceed 85 °C. The 150 °C ceiling is the absolute limit — derate the continuous current above 25 °C per the datasheet curve. ## Input capacitance and switching speed Input capacitance (Ciss) is 330 pF typical at Vds=25 V. That is moderate for a 150 V FET — it keeps the gate drive energy per cycle low, but it also means the Miller plateau is narrow enough that a 10–15 Ω gate resistor is usually enough to control ringing without slowing the edge too much.","metaTitle":"IRF7465TRPBF HEXFET N-Channel MOSFET, 150 V, 1.9 A, SO-8","metaDescription":"IRF7465TRPBF HEXFET N-Channel MOSFET, 150 V Vdss, 1.9 A continuous drain, 280 mOhm Rds(on) at 10 V. Active, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":"HEXFET®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":[],"specifications":{"Series":"HEXFET®","Package":"Tape & Reel (TR); Cut Tape (CT)","FET Type":"N-Channel","Vgs (Max)":"±30V","Technology":"MOSFET (Metal Oxide)","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Vgs(th) (Max) @ Id":"5.5V @ 250µA","Operating Temperature":"-55°C ~ 150°C (TJ)","Rds On (Max) @ Id, Vgs":"280mOhm @ 1.14A, 10V","Power Dissipation (Max)":"2.5W (Ta)","Supplier Device Package":"8-SO","Gate Charge (Qg) (Max) @ Vgs":"15 nC @ 10 V","Drain to Source Voltage (Vdss)":"150 V","Input Capacitance (Ciss) (Max) @ Vds":"330 pF @ 25 V","Drive Voltage (Max Rds On, Min Rds On)":"10V","Current - Continuous Drain (Id) @ 25°C":"1.9A (Ta)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.94","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.94000","currency":"USD"},{"qty":10,"price":"$0.81100","currency":"USD"},{"qty":100,"price":"$0.56130","currency":"USD"},{"qty":500,"price":"$0.46900","currency":"USD"},{"qty":1000,"price":"$0.39915","currency":"USD"},{"qty":2000,"price":"$0.35550","currency":"USD"},{"qty":4000,"price":"$0.35550","currency":"USD"},{"qty":8000,"price":"$0.33679","currency":"USD"},{"qty":12000,"price":"$0.31184","currency":"USD"},{"qty":28000,"price":"$0.30875","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/1b353f2fdf8a84c3e70c2824a8e85b5b.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is IRF7465TRPBF RoHS compliant?","answer":"Yes, the IRF7465TRPBF is ROHS3 compliant."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/IRF7465TRPBF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/IRF7465TRPBF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}