{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"IR2184PBF","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"IR2184PBF","canonicalUrl":"https://icboms.com/infineon/IR2184PBF","factsUrl":"https://icboms.com/api/mcp/products/IR2184PBF","rawCanonicalId":null},"summary":{"shortDescription":"Infineon IR2184PBF half-bridge gate driver, 600V bootstrap, 1.9A source / 2.3A sink peak output, 40ns/20ns rise/fall, -40°C to 150°C, 8-PDIP, Tube.","salesMarkdown":"## Half-bridge gate driver for 600V bus rails The IR2184PBF is a high-voltage, high-speed half-bridge gate driver from Infineon, designed to drive N-channel MOSFETs and IGBTs in synchronous or non-inverting configurations. It integrates a bootstrap diode for the high-side supply, allowing the device to drive the top transistor referenced to a 600 V maximum bus voltage. The 1.9 A source and 2.3 A sink peak output current is sized for medium-power IGBT modules and MOSFETs in motor drives, UPS systems, and DC-DC converters. The 1.9 A source / 2.3 A sink peak current determines the maximum gate charge the driver can switch at a given frequency. For a typical IGBT with 100 nC total gate charge, the driver can charge the gate in roughly 50 ns — fast enough for 20-50 kHz switching without excessive dead-time. The 40 ns rise and 20 ns fall times are asymmetric: the faster fall helps clamp the gate during turn-off, reducing the risk of shoot-through in the half-bridge. The 10 V to 20 V supply range covers standard gate drive voltages for both MOSFETs (10-15 V) and IGBTs (15-20 V). The 8-PDIP package is through-hole, which simplifies prototyping and rework but takes more board area than a surface-mount SOIC. The 0.300-inch body width is a standard DIP footprint, so it fits existing sockets and breadboards. ## NRND — sourcing reality for the IR2184PBF This means Infineon has flagged it for eventual phase-out — new designs should avoid it unless a last-time-buy is already secured.","metaTitle":"IR2184PBF Half-Bridge Gate Driver, 600V, 1.9A/2.3A, 8-PDIP","metaDescription":"IR2184PBF half-bridge gate driver from Infineon. 600V bootstrap, 1.9A source / 2.3A sink peak, 40ns/20ns rise/fall. -40°C to 150°C. NRND.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"NRND","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tube","Gate Type":"IGBT, N-Channel MOSFET","Input Type":"Non-Inverting","Channel Type":"Synchronous","Mounting Type":"Through Hole","Package / Case":"8-DIP (0.300\\\", 7.62mm)","Product Status":"Not For New Designs","lifecycle_stage":"eol_hot","Voltage - Supply":"10V ~ 20V","Number of Drivers":"2","Base Product Number":"IR2184","Driven Configuration":"Half-Bridge","Operating Temperature":"-40°C ~ 150°C (TJ)","Rise / Fall Time (Typ)":"40ns, 20ns","Supplier Device Package":"8-PDIP","Logic Voltage - VIL, VIH":"0.8V, 2.7V","High Side Voltage - Max (Bootstrap)":"600 V","Current - Peak Output (Source, Sink)":"1.9A, 2.3A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.6900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/6fe00f96a8f216d35f11f4439898d52e.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/IR2184PBF/alternatives.json"},"ai":{"faq":[{"question":"Is IR2184PBF obsolete?","answer":"It is not yet formally discontinued, but Infineon recommends against using it in new designs. Existing production lines should plan for a last-time-buy or a pin-compatible alternative."},{"question":"Can IR2184PBF drive two MOSFETs?","answer":"Yes. The IR2184PBF has two drivers in a half-bridge configuration — one high-side and one low-side. It can drive one N-channel MOSFET or IGBT on each output, making it suitable for a single half-bridge leg. For driving two separate half-bridges, you would need two such drivers."},{"question":"What is the difference between IR2184PBF and IR2184?","answer":"The IR2184PBF is the lead-free (PbF) version of the IR2184. Both share the same base product number, pinout, and electrical specifications. The PBF suffix indicates compliance with RoHS lead-free soldering requirements. Functionally they are interchangeable, but the PbF variant may have a different lifecycle status — check the specific order code."},{"question":"What is the replacement for IR2184PBF?","answer":"The closest pin-compatible alternative is the IR2184 (non-PbF), which shares the same base product number and half-bridge driver architecture. For new designs, consider Infineon's current-generation half-bridge drivers in the same 8-PDIP footprint, but verify pin compatibility from the respective datasheets."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/IR2184PBF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/IR2184PBF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}