{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"IR2130STRPBF","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"IR2130STRPBF","canonicalUrl":"https://icboms.com/infineon/IR2130STRPBF","factsUrl":"https://icboms.com/api/mcp/products/IR2130STRPBF","rawCanonicalId":null},"summary":{"shortDescription":"Infineon IR2130STRPBF, 3-Phase Half-Bridge Gate Driver, 6 Drivers, IGBT/N-Ch MOSFET, 600V Bootstrap, 250mA/500mA Peak Output, 28-SOIC, -40 to 150°C.","salesMarkdown":"## What this 3-phase gate driver brings to the board The Infineon IR2130STRPBF is a three-phase half-bridge gate driver designed to drive IGBTs and N-channel power MOSFETs in inverter and motor-drive stages. It packs six gate-drive outputs configured as three independent half-bridge channels, each with a floating high-side driver rated for a bootstrap supply up to 600 V. The peak output current is 250 mA source, 500 mA sink — enough to switch common industrial IGBT modules and discrete MOSFETs in the 10 A to 50 A range without excessive gate rise time. Supply voltage spans 10 V to 20 V, matching standard 15 V bias rails found in variable-frequency drives, servo amplifiers, and uninterruptible power supplies. ## Key specs that decide the fit The 600 V high-side bootstrap voltage is the hard ceiling for the DC bus voltage the driver can float on — if your inverter rail is 400 VDC or 480 VAC rectified, this part has the headroom. The 250 mA source / 500 mA sink peak output drives the gate charge of typical IGBTs and MOSFETs; expect rise and fall times around 80 ns and 35 ns respectively, which keeps switching losses manageable in the 10–20 kHz range. The logic inputs accept standard CMOS/TTL levels with a VIH of 2.2 V and VIL of 0.8 V, so a 3.3 V or 5 V microcontroller can drive it directly — no level shifter needed. The inverting input type means the outputs are the complement of the input signal; plan your firmware PWM polarity accordingly. ## Temperature grade and environment Rated for a junction temperature range of -40°C to 150°C, the IR2130STRPBF suits industrial motor drives, outdoor telecom rectifiers, and under-hood automotive inverter stages where the PCB sees sustained heat. The 28-SOIC wide-body package with 0.295-inch body width and 7.50 mm footprint is a common outline for high-voltage gate drivers; it provides adequate creepage for the 600 V rating when the PCB layout follows standard clearance rules. ## Sourcing and lifecycle reality The IR2130STRPBF carries an Active product status and is ROHS3 compliant. There is no official pin-compatible replacement listed in the Infineon gate-driver family, so if you are qualifying this part for a new design, lock in the supply channel early.","metaTitle":"IR2130STRPBF 3-Phase Gate Driver, 600V Bootstrap, 28-SOIC","metaDescription":"IR2130STRPBF is a 3-phase half-bridge gate driver for IGBTs and N-channel MOSFETs. 600V bootstrap, 250/500mA peak output, -40 to 150°C junction.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Gate Type":"IGBT, N-Channel MOSFET","Input Type":"Inverting","Channel Type":"3-Phase","Mounting Type":"Surface Mount","Package / Case":"28-SOIC (0.295\\\", 7.50mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"10V ~ 20V","Number of Drivers":"6","Driven Configuration":"Half-Bridge","Operating Temperature":"-40°C ~ 150°C (TJ)","Rise / Fall Time (Typ)":"80ns, 35ns","Supplier Device Package":"28-SOIC","Logic Voltage - VIL, VIH":"0.8V, 2.2V","High Side Voltage - Max (Bootstrap)":"600 V","Current - Peak Output (Source, Sink)":"250mA, 500mA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$13.06","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$13.06000","currency":"USD"},{"qty":10,"price":"$12.00500","currency":"USD"},{"qty":25,"price":"$11.50720","currency":"USD"},{"qty":100,"price":"$10.13860","currency":"USD"},{"qty":250,"price":"$9.64100","currency":"USD"},{"qty":500,"price":"$9.46522","currency":"USD"},{"qty":1000,"price":"$9.46522","currency":"USD"}]},"links":{"datasheetUrl":"https://www.infineon.com/dgdl/ir2130.pdf?fileId=5546d462533600a4015355c8757d169a","sourceUrl":null},"ai":{"faq":[{"question":"Can IR2130STRPBF drive MOSFETs?","answer":"Yes, the gate type is specified for both IGBTs and N-channel MOSFETs. The 250 mA source / 500 mA sink peak output is sufficient for most discrete power MOSFETs in motor-drive and inverter applications."},{"question":"Is IR2130STRPBF compatible with 5V logic?","answer":"Yes. The logic input thresholds are 0.8 V for VIL and 2.2 V for VIH, so a 5 V microcontroller output drives it reliably. A 3.3 V logic output also meets the VIH requirement with margin."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/IR2130STRPBF","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/IR2130STRPBF when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}