{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"IPAN60R125PFD7SXKSA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"IPAN60R125PFD7SXKSA1","canonicalUrl":"https://icboms.com/infineon/IPAN60R125PFD7SXKSA1","factsUrl":"https://icboms.com/api/mcp/products/IPAN60R125PFD7SXKSA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon CoolMOS™PFD7 N-channel MOSFET, IPAN60R125PFD7SXKSA1, 650V Vdss, 25A Id, 125mOhm Rds(on), TO-220 Full Pack, Through Hole, Tube.","salesMarkdown":"## CoolMOS PFD7 650V N-channel — what the headline ratings mean for the BOM The IPAN60R125PFD7SXKSA1: The 650 V Vdss gives safe operating margin on a 400 V DC bus — typical for a PFC boost stage or flyback primary clamp — without derating into the avalanche region during a load dump. The TO-220 Full Pack (PG-TO220-FP) isolates the tab electrically, so no insulating pad is needed — the backside is the drain, but the plastic envelope keeps the tab at case potential, simplifying mounting on a shared heatsink. ## Gate charge and switching-speed trade-off Total gate charge Qg is 36 nC at 10 V — a moderate figure that keeps the gate-driver current requirement manageable: driving this at 100 kHz switching frequency draws roughly 3.6 mA from the driver, well within the SOA of a standard 1 A totem-pole gate driver. The input capacitance Ciss is 1503 pF at 400 V drain-source, which sets the Miller plateau width and the turn-on/turn-off delay; a 10 Ω gate resistor gives a ~15 ns RC time constant, fast enough for hard-switching topologies without excessive ringing. ## Package and mounting — through-hole with isolated tab Through-hole TO-220 Full Pack (PG-TO220-FP) — the three leads are standard 0.100-inch pitch, and the fully molded body means the mounting hole does not carry drain potential. No mica washer or sil-pad is required when bolting to a chassis or heatsink, which saves assembly time and eliminates one thermal interface. ## Temperature grade and operating envelope Rated for junction temperature from -40 °C to 150 °C — the full industrial temperature band. The 150 °C Tj max means the device can run at elevated ambient in a sealed enclosure, but the 25 A continuous drain current is only spec'd at 25 °C case; derate above that per the datasheet's power derating curve. At 100 °C case, the maximum dissipation drops to roughly 20 W, which limits the usable continuous current to about 12–15 A depending on duty cycle.","metaTitle":"IPAN60R125PFD7SXKSA1 CoolMOS PFD7 N-Ch 650V 25A TO-220","metaDescription":"Infineon IPAN60R125PFD7SXKSA1 N-channel MOSFET, 650V Vdss, 25A Id, 125mOhm Rds(on), TO-220 Full Pack. Active production, RoHS3. Sourced per RFQ.","metaKeywords":null},"attributes":{"series":"CoolMOS™PFD7","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"CoolMOS™PFD7","Package":"Tube","FET Type":"N-Channel","Vgs (Max)":"±20V","Technology":"MOSFET (Metal Oxide)","FET Feature":"-","Mounting Type":"Through Hole","Package / Case":"TO-220-3 Full Pack","Product Status":"Active","lifecycle_stage":"eol_hot","Vgs(th) (Max) @ Id":"4.5V @ 390µA","Base Product Number":"IPAN60","Operating Temperature":"-40°C~150°C(TJ)","Rds On (Max) @ Id, Vgs":"125mOhm @ 7.8A, 10V","Power Dissipation (Max)":"32W (Tc)","Supplier Device Package":"PG-TO220-FP","Gate Charge (Qg) (Max) @ Vgs":"36 nC @ 10 V","Drain to Source Voltage (Vdss)":"650 V","Input Capacitance (Ciss) (Max) @ Vds":"1503 pF @ 400 V","Drive Voltage (Max Rds On, Min Rds On)":"10V","Current - Continuous Drain (Id) @ 25°C":"25A (Tc)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.1600","priceTiers":[{"qty":1,"price":"$3.16000","currency":"USD"},{"qty":10,"price":"$2.83500","currency":"USD"},{"qty":100,"price":"$2.32280","currency":"USD"},{"qty":500,"price":"$1.97734","currency":"USD"},{"qty":1000,"price":"$1.66764","currency":"USD"},{"qty":2000,"price":"$1.58426","currency":"USD"},{"qty":5000,"price":"$1.55370","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/3ea9a25cb99a0a966c235c6665fdedfc.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/IPAN60R125PFD7SXKSA1/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Infineon provide for IPAN60R125PFD7SXKSA1?","answer":"The part is RoHS3 compliant (RoHS exemption status per directive 2011/65/EU). No REACH, UL, or IEC certification is listed in the available documentation; the datasheet covers the electrical and thermal ratings."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/IPAN60R125PFD7SXKSA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/IPAN60R125PFD7SXKSA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}