{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"IPA60R180C7XKSA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"IPA60R180C7XKSA1","canonicalUrl":"https://icboms.com/infineon/IPA60R180C7XKSA1","factsUrl":"https://icboms.com/api/mcp/products/IPA60R180C7XKSA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon CoolMOS™ C7 series, N-Channel MOSFET, 600V Vdss, 180mOhm Rds(on) @ 10V, 9A Id, 24nC Qg, TO-220-3 Full Pack, -55°C to 150°C.","salesMarkdown":"The IPA60R180C7XKSA1: The 1080 pF input capacitance at 400 V is light enough that the Miller plateau does not dominate the turn-on edge, which helps keep EMI in check without excessive gate resistance. The base product number IPA60R covers a range of voltage and Rds(on) variants in the same C7 family, so if a future redesign needs a lower Rds(on) or higher current rating, the footprint and gate-drive voltage stay compatible. ## Gate drive and switching — the 10 V anchor That 10 V is the standard drive level for a MOSFET driver or a bootstrap supply from the converter's auxiliary winding. The gate charge of 24 nC at 10 V means a typical driver with 1 A peak source/sink capability will switch the device in the tens of nanoseconds range. The threshold voltage max is 4 V at 260 µA, so a 5 V logic-level gate drive will not fully enhance the channel — plan for a 10 V rail or a dedicated driver with a charge-pump stage if the controller only outputs 5 V. ## Thermal and current — the TO-220 Full Pack limits The TO-220 Full Pack (fully isolated plastic package) has higher thermal resistance than a standard TO-220 with a metal tab, so the 9 A figure assumes a well-ventilated heatsink or forced airflow. In a real 85°C ambient inside a power supply, derate the current to roughly 5–6 A continuous to stay inside the junction temperature limit of 150°C.","metaTitle":"Infineon IPA60R180C7XKSA1 CoolMOS C7 N-Ch 600V 9A TO-220FP","metaDescription":"Infineon IPA60R180C7XKSA1 CoolMOS C7 N-channel MOSFET: 600V Vdss, 180mOhm Rds(on), 9A Id, 24nC Qg, TO-220 Full Pack.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"CoolMOS™ C7","Package":"Tube","FET Type":"N-Channel","Vgs (Max)":"±20V","Technology":"MOSFET (Metal Oxide)","FET Feature":"-","Mounting Type":"Through Hole","Package / Case":"TO-220-3 Full Pack","Product Status":"Active","lifecycle_stage":"eol_hot","Vgs(th) (Max) @ Id":"4V @ 260µA","Base Product Number":"IPA60R","Operating Temperature":"-55°C~150°C(TJ)","Rds On (Max) @ Id, Vgs":"180mOhm @ 5.3A, 10V","Power Dissipation (Max)":"29W (Tc)","Supplier Device Package":"PG-TO220 Full Pack","Gate Charge (Qg) (Max) @ Vgs":"24 nC @ 10 V","Drain to Source Voltage (Vdss)":"600 V","Input Capacitance (Ciss) (Max) @ Vds":"1080 pF @ 400 V","Drive Voltage (Max Rds On, Min Rds On)":"10V","Current - Continuous Drain (Id) @ 25°C":"9A (Tc)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.7000","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/6106afc397833967aef7707372311992.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can IPA60R180C7XKSA1 replace IPA60R180C6?","answer":"The IPA60R180C7XKSA1 is the CoolMOS C7 generation successor to the earlier C6 series part IPA60R180C6. Both are 600 V, 180 mOhm N-channel MOSFETs in the same TO-220 Full Pack footprint. The C7 generation typically offers lower gate charge and improved switching performance, so it is a drop-in replacement electrically and mechanically. Verify the gate-drive circuit — the C7 part still uses 10 V gate drive — and check that the slightly different input capacitance does not shift the switching edge timing outside your dead-time budget."},{"question":"What is the recommended Vgs drive voltage for IPA60R180C7XKSA1?","answer":"For minimum conduction loss, drive the gate with 10 V to 12 V. A 5 V logic-level signal will not fully enhance the channel — the threshold voltage max is 4 V at 260 µA, so the device would operate in the linear region with high dissipation."},{"question":"Does IPA60R180C7XKSA1 come in tape and reel packaging?","answer":"The listed packaging for this order code is Tube, not Tape & Reel. The TO-220 Full Pack through-hole package is typically shipped in tubes for manual or wave-solder assembly. If your line requires Tape & Reel for automated insertion, check the Infineon ordering codes for the same device in a surface-mount DPAK or D2PAK variant."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/IPA60R180C7XKSA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/IPA60R180C7XKSA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}