{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"IMX1T110","brand":"ROHM Semiconductor","brandSlug":"rohm","productSlug":"IMX1T110","canonicalUrl":"https://icboms.com/rohm/IMX1T110","factsUrl":"https://icboms.com/api/mcp/products/IMX1T110","rawCanonicalId":null},"summary":{"shortDescription":"ROHM IMX1T110 dual NPN transistor, 50V Vce, 150mA Ic, 180MHz ft, 300mW, SC-74/SOT-457 surface mount, SMT6 package.","salesMarkdown":"The ROHM IMX1T110 packs two NPN transistors into a single SC-74 / SOT-457 surface-mount package, saving board space and reducing pick-and-place cost compared to two discrete SOT-23s. Each transistor is rated for a collector-emitter breakdown voltage of 50 V and a maximum collector current of 150 mA, with a transition frequency of 180 MHz — making it a solid fit for low-power switching, signal amplification, and driver stages in industrial controls, consumer electronics, and telecom equipment where board density matters. The 50 V Vce breakdown and 150 mA collector current define the safe operating envelope for general-purpose switching and amplification up to medium-voltage rails. The 180 MHz transition frequency gives enough bandwidth for VHF oscillator and preamp stages, though the 300 mW total power dissipation limits continuous current in a single device — derate if both transistors run hard simultaneously. DC current gain (hFE) is a minimum of 120 at 1 mA, 6 V, which provides consistent drive for low-level signal stages and ensures the part can saturate a relay or LED driver without excessive base current. Vce saturation is 400 mV max at 5 mA base, 50 mA collector — adequate for logic-level switching but not a low-Vce(sat) type for high-efficiency applications. Collector cutoff current is a maximum 100 nA, which keeps leakage negligible in high-impedance or battery-powered circuits at room temperature. The 150°C junction temperature rating allows operation in warm environments like engine bays or industrial enclosures, provided the total power stays within the 300 mW package limit. ## Package and mounting notes The IMX1T110 comes in an SC-74 / SOT-457 package (supplier device package SMT6), a six-pin small outline surface-mount package. ## Lifecycle and sourcing posture It is ROHS3 compliant.","metaTitle":"IMX1T110 Dual NPN Transistor, 50V 150mA 180MHz SC-74","metaDescription":"IMX1T110 dual NPN transistor, 50V Vce, 150mA Ic, 180MHz ft, SC-74/SOT-457. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Microcontrollers & Processors (MCU / MPU / DSP)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Power - Max":"300mW","Mounting Type":"Surface Mount","Package / Case":"SC-74, SOT-457","Transistor Type":"2 NPN (Dual)","lifecycle_stage":"eol_hot","Operating Temperature":"150°C (TJ)","Frequency - Transition":"180MHz","Supplier Device Package":"SMT6","Vce Saturation (Max) @ Ib, Ic":"400mV @ 5mA, 50mA","Current - Collector (Ic) (Max)":"150mA","Current - Collector Cutoff (Max)":"100nA (ICBO)","DC Current Gain (hFE) (Min) @ Ic, Vce":"120 @ 1mA, 6V","Voltage - Collector Emitter Breakdown (Max)":"50V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.44","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.42000","currency":"USD"},{"qty":10,"price":"$0.29600","currency":"USD"},{"qty":100,"price":"$0.14940","currency":"USD"},{"qty":500,"price":"$0.13238","currency":"USD"},{"qty":1000,"price":"$0.10302","currency":"USD"},{"qty":3000,"price":"$0.09220","currency":"USD"},{"qty":6000,"price":"$0.09014","currency":"USD"},{"qty":9000,"price":"$0.07984","currency":"USD"},{"qty":30000,"price":"$0.07881","currency":"USD"},{"qty":75000,"price":"$0.06696","currency":"USD"},{"qty":150000,"price":"$0.06439","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/1ba805ba56f2a4c5b9f8ee8d50560010.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can I buy the IMX1T110 in cut tape or reels?","answer":"The reel format suits automated assembly; cut tape works for prototypes and small batches."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/rohm/IMX1T110","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/rohm/IMX1T110 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}