{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FODM1009R2V","brand":"onsemi","brandSlug":"onsemi","productSlug":"FODM1009R2V","canonicalUrl":"https://icboms.com/onsemi/FODM1009R2V","factsUrl":"https://icboms.com/api/mcp/products/FODM1009R2V","rawCanonicalId":null},"summary":{"shortDescription":"onsemi FODM1009R2V single-channel transistor-output optocoupler, 5000Vrms isolation, 200-400% CTR, 4-SOP Gull Wing, Tape & Reel.","salesMarkdown":"## 5000Vrms isolation — the reinforced-grade barrier The FODM1009R2V: The headline rating is 5000Vrms isolation between input and output. That places this optocoupler in the reinforced-insulation class per IEC 60950-1 and IEC 62368-1 — the level required for safety isolation in mains-connected circuits such as AC-DC power supplies, motor-drive feedback paths, and industrial PLC I/O modules where the field side must be galvanically separated from the controller side. ## CTR window — 200% to 400% at 5 mA A 200% floor means the output transistor can sink at least 10 mA with 5 mA LED drive — enough to pull a standard 5 V logic input low without an external pull-up resistor. The 400% ceiling prevents saturation-induced slow turn-off in high-gain circuits. This wide CTR window also absorbs LED degradation over temperature and lifetime, so the circuit stays within the logic threshold without re-biasing. ## Switching speed — 5.7 µs rise, 8.5 µs fall Typical rise and fall times are 5.7 µs and 8.5 µs respectively. This sets the practical data-rate ceiling at roughly 60 kHz for a 50% duty-cycle square wave — adequate for PWM signals in motor drives, relay coil drivers, and status feedback from sensors. It is not a part for high-speed serial isolation (CAN, RS-485, I²C); those need a digital isolator or a dedicated optocoupler with logic-output stages. ## Industrial temperature range — -40°C to 110°C The operating temperature span covers -40°C to 110°C. The 50 mA maximum output current and 70 V output voltage rating give enough headroom to drive a small relay or a logic input directly. ## Package and tape format Housed in a 4-SOP Gull Wing package (supplier device package 4-SOP), the FODM1009R2V shares the same 4-SMD, Gull Wing footprint as the tube-packaged FODM1009. The 4-SOP body width is 4.4 mm typical, with a 2.54 mm pin pitch that matches standard optocoupler land patterns.","metaTitle":"onsemi FODM1009R2V Optoisolator, 5000Vrms, 4-SOP, Active","metaDescription":"onsemi FODM1009R2V single-channel transistor-output optocoupler. 5000Vrms isolation, 200-400% CTR at 5 mA, -40 to 110°C. Active production, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Optoisolators"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Input Type":"DC","Output Type":"Transistor","Mounting Type":"Surface Mount","Package / Case":"4-SMD, Gull Wing","lifecycle_stage":"eol_hot","Number of Channels":"1","Voltage - Isolation":"5000Vrms","Vce Saturation (Max)":"300mV","Operating Temperature":"-40°C ~ 110°C","Rise / Fall Time (Typ)":"5.7µs, 8.5µs","Voltage - Output (Max)":"70V","Supplier Device Package":"4-SOP","Current - Output / Channel":"50mA","Current Transfer Ratio (Max)":"400% @ 5mA","Current Transfer Ratio (Min)":"200% @ 5mA","Voltage - Forward (Vf) (Typ)":"1.4V","Current - DC Forward (If) (Max)":"50 mA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.81","stockQuantity":23,"priceTiers":[{"qty":1,"price":"$0.81000","currency":"USD"},{"qty":10,"price":"$0.52700","currency":"USD"},{"qty":100,"price":"$0.34520","currency":"USD"},{"qty":1000,"price":"$0.27255","currency":"USD"},{"qty":3000,"price":"$0.25438","currency":"USD"},{"qty":6000,"price":"$0.24529","currency":"USD"},{"qty":15000,"price":"$0.24166","currency":"USD"},{"qty":30000,"price":"$0.23621","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/c7ba3664ba302aea4448aa3e3b2cf2de.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the closest functional second-source for FODM1009R2V?","answer":"The tube-packaged FODM1009 is the same die in the same 4-SOP Gull Wing package, with identical ratings: 5000Vrms isolation, 200-400% CTR, 50 mA output, and -40°C to 110°C range. The only difference is the shipping format — FODM1009 comes in tubes, while FODM1009R2V ships on Tape & Reel or Cut Tape. No rewiring or layout change is needed to swap between them."},{"question":"What compliance documentation does onsemi provide for FODM1009R2V?","answer":"No UL or IEC certification file number is listed in the standard spec record, but the 5000Vrms isolation rating aligns with reinforced insulation requirements per IEC 60950-1 and IEC 62368-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/onsemi/FODM1009R2V","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/onsemi/FODM1009R2V when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}