{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FOD2712AR2V","brand":"onsemi","brandSlug":"onsemi","productSlug":"FOD2712AR2V","canonicalUrl":"https://icboms.com/onsemi/FOD2712AR2V","factsUrl":"https://icboms.com/api/mcp/products/FOD2712AR2V","rawCanonicalId":null},"summary":{"shortDescription":"onsemi FOD2712AR2V single-channel DC-input transistor-output optoisolator, 2500Vrms isolation, 100-200% CTR at 10mA, 8-SOIC surface-mount package, -40°C to 85°C industrial temperature range.","salesMarkdown":"The FOD2712AR2V: ROHS3 compliant — no exemptions, full lead-free and halogen-free compliance for global shipping. ## Isolation barrier and what 2500Vrms means for your circuit Rated for 2500Vrms isolation — this is a basic isolation level, not reinforced. It is sufficient for functional isolation in circuits referenced to a SELV (Safety Extra-Low Voltage) supply or for signal isolation where the working voltage stays below 250V peak. Do not use this part where reinforced isolation to mains (typically 5000Vrms or higher) is required by IEC 60950 or IEC 62368. The single-channel DC-input transistor-output topology means the LED is driven from a DC source and the output is a phototransistor with an open collector — no logic-level output buffer, no AC input rectification. The output pulls low when the LED is on; the off-state output floats unless pulled up externally. ## CTR range and drive current budget At 10mA LED drive, the output transistor can sink between 10mA and 20mA — enough to drive a CMOS logic input or a low-power relay directly. The 50mA absolute maximum output current means the output is not a power driver; use it for signal-level switching. Maximum Vce saturation is 400mV — at 10mA collector current the output drops under half a volt, leaving good noise margin when interfacing to 3.3V or 5V logic families. No special pad geometry or thermal vias are needed for this part; the 50mA output current generates negligible heat. The supplier device package is listed as 8-SOIC — identical to the JEDEC MS-012 variant. Tape & Reel and Cut Tape options are available for both volume production and prototype quantities. ## Temperature grade and environment Suitable for factory-floor control cabinets, outdoor telecom enclosures, and automotive cabin environments (not under-hood, which typically requires 125°C).","metaTitle":"onsemi FOD2712AR2V Optoisolator, 2500Vrms, 8-SOIC","metaDescription":"onsemi FOD2712AR2V single-channel DC-input transistor-output optoisolator, 2500Vrms isolation, 100-200% CTR at 10mA, -40°C to 85°C, 8-SOIC.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Optoisolators"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Input Type":"DC","Output Type":"Transistor","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Number of Channels":"1","Voltage - Isolation":"2500Vrms","Vce Saturation (Max)":"400mV","Operating Temperature":"-40°C ~ 85°C","Voltage - Output (Max)":"30V","Supplier Device Package":"8-SOIC","Current - Output / Channel":"50mA","Current Transfer Ratio (Max)":"200% @ 10mA","Current Transfer Ratio (Min)":"100% @ 10mA","Voltage - Forward (Vf) (Typ)":"1.5V (Max)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.87","stockQuantity":15,"priceTiers":[{"qty":1,"price":"$1.87000","currency":"USD"},{"qty":10,"price":"$1.18300","currency":"USD"},{"qty":100,"price":"$0.87560","currency":"USD"},{"qty":500,"price":"$0.80458","currency":"USD"},{"qty":1000,"price":"$0.66260","currency":"USD"},{"qty":2500,"price":"$0.62947","currency":"USD"},{"qty":5000,"price":"$0.61527","currency":"USD"},{"qty":12500,"price":"$0.60107","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/0b68adcaace096aaa4197e1d149eae06.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the closest functional alternative to FOD2712AR2V?","answer":"The FODM1009 is a functional peer with the same DC input and transistor output topology, but it offers 5000Vrms isolation (vs 2500Vrms) and comes in a different package. The FOD2712AR2V will not drop into a board designed for the FODM1009 without a layout change — the pinout and footprint differ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/onsemi/FOD2712AR2V","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/onsemi/FOD2712AR2V when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}