{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"FOD260LSD","brand":"onsemi","brandSlug":"onsemi","productSlug":"FOD260LSD","canonicalUrl":"https://icboms.com/onsemi/FOD260LSD","factsUrl":"https://icboms.com/api/mcp/products/FOD260LSD","rawCanonicalId":null},"summary":{"shortDescription":"onsemi FOD260LSD, single-channel optoisolator, 10Mbps data rate, 5000Vrms isolation, open collector Schottky clamped output, 8-SMD gull wing package, -40°C to 85°C, 3V to 5.5V supply.","salesMarkdown":"## 10 Mbps open-collector optocoupler for isolated digital links The FOD260LSD from onsemi is a single-channel optoisolator rated for 10Mbps data rate with 5000Vrms isolation, making it a fit for isolating fast digital signals like encoder outputs, PLC digital inputs, or communication interfaces where you need to break ground loops without slowing the edge. The open-collector output with Schottky clamp lets you pull the output to any supply rail from 3V to 5.5V — useful when the receiving logic runs at a different voltage than the isolated side. ## 25 kV/µs CMTI and 90 ns propagation delay Common-mode transient immunity is rated at 25kV/µs minimum — this is the spec that matters when the optocoupler sits across a motor-drive phase or a switching power supply; without it, fast voltage swings on the primary side couple through the parasitic capacitance and flip the output state. Propagation delay is 90 ns max for low-to-high and 75 ns max for high-to-low, with typical rise and fall times of 22 ns and 3 ns respectively. That timing budget keeps the part usable for 10 Mbps NRZ data without pulse-width distortion eating into the bit period. ## Active production — no end-of-life watch needed The FOD260LSD is listed as Active with ROHS3 compliance. Available in Tape & Reel (TR) or Cut Tape (CT) in the 8-SMD gull-wing package. ## Industrial temperature range and supply flexibility Operating temperature spans -40°C to 85°C, covering factory-floor cabinets, outdoor telecom shelters, and under-hood automotive auxiliary boxes without needing a mil-temp part. The input side is a DC-coupled LED with typical forward voltage 1.4V and max forward current 50 mA. The output side can sink up to 50 mA per channel — enough to drive a downstream optocoupler or a small relay coil directly.","metaTitle":"FOD260LSD onsemi Optoisolator 10Mbps 5000Vrms Open Collector","metaDescription":"onsemi FOD260LSD optoisolator: 10Mbps data rate, 5000Vrms isolation, open collector Schottky clamped output, -40°C to 85°C, 8-SMD gull wing. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Optoisolators"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Data Rate":"10Mbps","Input Type":"DC","Output Type":"Open Collector, Schottky Clamped","Mounting Type":"Surface Mount","Package / Case":"8-SMD, Gull Wing","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 5.5V","Number of Channels":"1","Voltage - Isolation":"5000Vrms","Operating Temperature":"-40°C ~ 85°C","Inputs - Side 1/Side 2":"1/0","Rise / Fall Time (Typ)":"22ns, 3ns","Supplier Device Package":"8-SMD","Current - Output / Channel":"50 mA","Voltage - Forward (Vf) (Typ)":"1.4V","Current - DC Forward (If) (Max)":"50mA","Propagation Delay tpLH / tpHL (Max)":"90ns, 75ns","Common Mode Transient Immunity (Min)":"25kV/µs"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.64","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$2.64000","currency":"USD"},{"qty":10,"price":"$1.76100","currency":"USD"},{"qty":100,"price":"$1.35490","currency":"USD"},{"qty":500,"price":"$1.22476","currency":"USD"},{"qty":1000,"price":"$1.05253","currency":"USD"},{"qty":2000,"price":"$0.99513","currency":"USD"},{"qty":5000,"price":"$0.97216","currency":"USD"},{"qty":10000,"price":"$0.95685","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/99bf398d7f88c3744b16054a2d4c10a8.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is FOD260LSD compatible with 5V supply?","answer":"Yes, the output supply range is 3V to 5.5V, so it works directly on a 5V rail. The open-collector output with Schottky clamp lets you pull up to any voltage in that range, matching the logic level on the isolated side."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/onsemi/FOD260LSD","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/onsemi/FOD260LSD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T20:07:09.960Z","lastPublished":"2026-07-17T20:07:09.960Z","indexable":true}}