{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ESP32-PICO-V3-02","brand":"Espressif Systems","brandSlug":"espressif","productSlug":"ESP32-PICO-V3-02","canonicalUrl":"https://icboms.com/espressif/ESP32-PICO-V3-02","factsUrl":"https://icboms.com/api/mcp/products/ESP32-PICO-V3-02","rawCanonicalId":null},"summary":{"shortDescription":"Espressif Systems ESP32 series, RF & Wireless IC System-in-Package, ESP32-PICO-V3-02, 802.11b/g/n + Bluetooth v4.2, 150Mbps, 2.4GHz, 8MB Flash, 2MB SRAM, -97dBm sensitivity, 19.5dBm output, 48-LFQFN Exposed Pad, Surface Mount, -40°C to 85°C.","salesMarkdown":"## SiP module integrating flash, SRAM, and RF in a compact 48-LFQFN The ESP32-PICO-V3-02 is a System-in-Package module from Espressif Systems that integrates the ESP32 MCU, 8 MB flash, 2 MB SRAM, and a 2.4 GHz Wi-Fi/Bluetooth transceiver into a single 48-LFQFN Exposed Pad package. This eliminates the need for external memory and RF matching components, reducing BOM count and PCB area for wireless IoT products. ## Wireless protocol and RF performance Supports 802.11b/g/n Wi-Fi at PHY data rates up to 150 Mbps and Bluetooth v4.2 (BR/EDR + BLE) — the dual-protocol stack runs concurrently, so a single module handles both Wi-Fi data streaming and Bluetooth LE beacon scanning without a second radio. Receiver sensitivity of -97 dBm (likely at 1 Mbps DSSS) gives usable range in noisy 2.4 GHz environments; the 19.5 dBm transmit output power provides headroom for regulatory limits (FCC/ETSI typically cap at 20 dBm) and allows the module to punch through walls in smart-home or industrial mesh networks. Current consumption ranges from 111 mA to 117 mA in receive mode and 205 mA to 385 mA during transmit — the wide transmit spread reflects the output power back-off; at 19.5 dBm the module draws near the upper end, so a 500 mA supply rail with adequate decoupling is recommended for burst transmission. ## Memory, interfaces, and temperature grade On-chip 8 MB flash and 2 MB SRAM support application firmware plus OTA update staging without external memory — the flash is sufficient for TCP/IP stacks, TLS, and application code in most IoT use cases. Serial interfaces include ADC, GPIO, I²C, I²S, SDIO, SPI, PWM, and UART, covering sensor, display, audio, and storage peripherals. ## Package and board integration notes The module integrates the RF matching network and antenna port (I-PEX connector); the antenna itself is not included, so a certified external antenna or PCB trace antenna must be added per regulatory approval. Available in Tape & Reel (TR) for automated pick-and-place assembly and Cut Tape (CT) for prototyping — the reel quantity supports volume production without reel changeovers.","metaTitle":"ESP32-PICO-V3-02 Espressif SiP Module, 8MB Flash, 2MB SRAM","metaDescription":"ESP32-PICO-V3-02 System-in-Package module from Espressif Systems. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["RF & Wireless ICs"],"specifications":{"Mfr":"Espressif Systems","Series":"ESP32","Package":"Tape & Reel (TR) Cut Tape (CT)","Protocol":"802.11b/g/n, Bluetooth v4.2","Data Rate":"150Mbps","Frequency":"2.4GHz","Modulation":"-","Memory Size":"8MB Flash, 2MB SRAM","Sensitivity":"-97dBm","Antenna Type":"Antenna Not Included, I-PEX","Mounting Type":"Surface Mount","Package / Case":"48-LFQFN Exposed Pad","Power - Output":"19.5dBm","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Serial Interfaces":"ADC, GPIO, I²C, I²S, SDIO, SPI, PWM, UART","RF Family/Standard":"Bluetooth, WiFi","Utilized IC / Part":"ESP32","Base Product Number":"ESP32","Current - Receiving":"111mA ~ 117mA","Operating Temperature":"-40°C ~ 85°C","Current - Transmitting":"205mA ~ 385mA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.2000","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/c7ea6070835d19407d4fcf52ca8ba8fd.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/ESP32-PICO-V3-02/alternatives.json"},"ai":{"faq":[{"question":"What wireless protocols does the ESP32-PICO-V3-02 support?","answer":"It supports 802.11b/g/n Wi-Fi at up to 150 Mbps PHY rate and Bluetooth v4.2 (BR/EDR + BLE), both operating in the 2.4 GHz band. The dual-protocol stack runs concurrently."},{"question":"Does the ESP32-PICO-V3-02 include an antenna?","answer":"No, the antenna is not included. The module provides an I-PEX connector for an external antenna; a certified antenna must be selected to meet regulatory compliance."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/espressif/ESP32-PICO-V3-02","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/espressif/ESP32-PICO-V3-02 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}