{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"EPM570GF256I5N","brand":"Intel","brandSlug":"intel","productSlug":"EPM570GF256I5N","canonicalUrl":"https://icboms.com/intel/EPM570GF256I5N","factsUrl":"https://icboms.com/api/mcp/products/EPM570GF256I5N","rawCanonicalId":null},"summary":{"shortDescription":"Intel MAX II CPLD, EPM570GF256I5N, 440 macrocells, 5.4 ns tpd, 160 I/O, 1.71V-1.89V core, -40°C to 100°C, 256-FBGA (17x17), Tray.","salesMarkdown":"## Lifecycle and BOM-fit for this MAX II CPLD The EPM570GF256I5N: It packs 440 macrocells and 570 logic elements, with a pin-to-pin propagation delay of 5.4 ns max — fast enough for glue-logic consolidation and bus-interface decoding in systems clocked below about 90 MHz. The 160 user I/O break out to a 256-ball FBGA (17x17 mm) — the 1.0 mm ball pitch is a standard four-layer-board layout; no micro-via or HDI stack-up required. The core supply is 1.71 V to 1.89 V — a single 1.8 V rail with ±5 % tolerance covers it, which matches the common output of a 1.8 V LDO or switching regulator. In-system programmable via JTAG, so the board can be assembled with a blank device and programmed on the line — no pre-programmed inventory to manage. ## Package and board-level integration 256-FBGA (17x17 mm) with a 1.0 mm ball pitch — the fan-out uses two signal layers and a power plane; the centre 8x8 ball array is mostly VCC and GND, so a four-layer board with the core supply on an inner plane is the typical stack-up. The device ships in a tray — no moisture-sensitive reel handling; the MSL rating is not listed here, but standard MAX II devices are typically MSL 3, so a bake before reflow is prudent if the tray has been open longer than the floor life.","metaTitle":"Intel EPM570GF256I5N MAX II CPLD, 440 macrocells, 5.4 ns","metaDescription":"Intel EPM570GF256I5N MAX II CPLD, 440 macrocells, 5.4 ns tpd, 160 I/O, -40°C to 100°C, 256-FBGA. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["FPGA / CPLD & Programmable Logic"],"specifications":{"Mfr":"Intel","Series":"MAX® II","Package":"Tray","Mounting Type":"Surface Mount","Number of I/O":"160","Package / Case":"256-BGA","Product Status":"Active","lifecycle_stage":"eol_hot","Programmable Type":"In System Programmable","Base Product Number":"EPM570","Number of Macrocells":"440","Delay Time tpd(1) Max":"5.4 ns","Operating Temperature":"-40°C~100°C(TJ)","Supplier Device Package":"256-FBGA (17x17)","Voltage Supply - Internal":"1.71V ~ 1.89V","Number of Logic Elements/Blocks":"570"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$69.0000","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"What is the maximum operating temperature of EPM570GF256I5N?","answer":"The junction temperature range is -40°C to 100°C (TJ). This is the industrial-grade part, so it handles 85°C ambient with self-heating margin."},{"question":"Is EPM570GF256I5N obsolete?","answer":"No — the product status is Active. No end-of-life or last-time-buy notice has been issued by Intel."},{"question":"What is the propagation delay (tpd) of EPM570GF256I5N?","answer":"The maximum pin-to-pin propagation delay (tpd1) is 5.4 ns. This is the combinatorial delay through one macrocell at the fastest speed grade."},{"question":"Can EPM570GF256I5N be used as a replacement for EPM570GF256C5N?","answer":"Electrically they are identical — same macrocell count, same speed grade, same package. The I5N can replace a C5N in any socket; the reverse is only safe if the ambient never exceeds 85°C."},{"question":"What is the difference between MAX II and MAX V?","answer":"MAX V is the newer family with lower static power (about half the standby current), higher density options (up to 2210 macrocells), and a broader I/O voltage range (1.2 V to 3.3 V). MAX II is still active and adequate for designs that need up to 570 logic elements and 1.8 V core logic."},{"question":"Is EPM570GF256I5N RoHS compliant?","answer":"The part is lead-free and RoHS compliant — the 'I5N' suffix indicates a lead-free, RoHS-compliant finish. No additional exemption documentation is needed for EU RoHS markets."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/intel/EPM570GF256I5N","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/intel/EPM570GF256I5N when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}