{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"EE-SX954P-R 1M","brand":"Omron","brandSlug":"omron","productSlug":"EE-SX954P-R-1M","canonicalUrl":"https://icboms.com/omron/EE-SX954P-R-1M","factsUrl":"https://icboms.com/api/mcp/products/EE-SX954P-R%201M","rawCanonicalId":null},"summary":{"shortDescription":"Omron series EE-SX95, has_mpn EE-SX954, amplified through-beam photoelectric sensor, PNP Dark-ON/Light-ON selectable output, 24 V supply, 0.197 mm sensing distance, chassis mount, 1 m cable, -25°C to 55°C operating range.","salesMarkdown":"## 24 V PNP slot sensor with selectable output logic The Omron EE-SX954P-R 1M is an amplified through-beam photoelectric sensor from the EE-SX95 series, built for presence detection in automated machinery. It operates on a 24 VDC supply and delivers a PNP output that can be switched between Dark-ON and Light-ON operation via a selector. The 0.197 mm sensing slot width is sized for edge detection on encoder wheels, flag interrupters, or small-part pass-through sensing on pick-and-place feeders and conveyor gates. The 1 m cable terminates to bare leads for direct termination inside a control cabinet or junction box. ## Wiring the Dark-ON / Light-ON selector The selectable output logic means one wire sets the active state. In Dark-ON mode the PNP output pulls high when the beam is blocked; in Light-ON mode it pulls high when the beam is clear. This is set by connecting the select line to either the supply rail or ground — the datasheet wiring diagram shows the exact pin. For a 24 V PLC input, wire the PNP output to the sinking input card; no level shifter needed. The switching current is rated at 0.05 A, sufficient for a single PLC input or a small relay coil. ## Temperature range and environment Rated for -25°C to 55°C operating ambient, this sensor is suited for indoor industrial environments — factory floors, packaging lines, and warehouse sorters. It is not rated for freezing storage or high-heat zones near ovens or dryers. The amplified output gives a clean logic-level signal over the full temperature span, so the PLC input sees a solid high or low without false edges.","metaTitle":"Omron EE-SX954P-R 1M Through-Beam Sensor, PNP, 24V, 0.197 mm Slot","metaDescription":"Omron EE-SX954P-R 1M amplified through-beam photoelectric sensor, PNP selectable Dark-ON/Light-ON, 24 VDC, 0.197 mm slot, 1 m cable. Active, available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"series":"EE-SX95","has_mpn":"EE-SX954","output_type":"PNP - Dark-ON/Light-ON - Selectable","package_type":"Bulk","product_type":"Amplified","sensing_type":"Through-Beam","mounting_type":"Chassis Mount","product_status":"Active","lifecycle_stage":"current","supply_voltage_v":"24.0","switching_current_a":"0.05","sensing_distance_max_mm":"0.197","Operating Temperature High":"-25°C to 55°C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$28.63","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://www.ia.omron.com:443/data_pdf/cat/ee-sx95_e435-e1_3_4_csm1012815.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What are the exact specifications of Omron EE-SX954P-R 1M?","answer":"It is an amplified through-beam photoelectric sensor with a PNP output that is selectable for Dark-ON or Light-ON operation. Supply voltage is 24 VDC, switching current is 0.05 A, sensing slot width is 0.197 mm, cable length is 1 m, and operating temperature range is -25°C to 55°C. Mounting is chassis mount, package is bulk."},{"question":"Is EE-SX954P-R 1M compatible with 24V PLC inputs?","answer":"Yes. The sensor runs on 24 VDC and its PNP output directly drives a sinking 24 V PLC input without additional level shifting. The 0.05 A switching current is well within the typical input current of a PLC card."},{"question":"How to wire EE-SX954P-R 1M for dark-on vs light-on operation?","answer":"The output logic is selected by connecting the select wire to either the supply rail (Light-ON) or ground (Dark-ON). The datasheet provides the exact wiring diagram for the 1 m cable leads. In Dark-ON the PNP output goes high when the beam is blocked; in Light-ON it goes high when the beam is clear."},{"question":"What is the slot width of EE-SX954P-R 1M?","answer":"The sensing slot width is 0.197 mm. This is the gap between the emitter and receiver; the flag or vane passing through must be thinner than this to avoid contact."},{"question":"Can EE-SX954P-R 1M work with 12V supply?","answer":"The rated supply voltage is 24 VDC. Operating at 12 V is outside the specified range and may cause unreliable switching or no output. Use a 24 V supply for guaranteed operation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/omron/EE-SX954P-R-1M","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/omron/EE-SX954P-R-1M when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}