{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"EE-SX671P","brand":"Omron","brandSlug":"omron","productSlug":"EE-SX671P","canonicalUrl":"https://icboms.com/omron/EE-SX671P","factsUrl":"https://icboms.com/api/mcp/products/EE-SX671P","rawCanonicalId":null},"summary":{"shortDescription":"Omron EE-SX671P through-beam slot sensor, PNP open collector output, 5 V supply, 1 ms response, 5 mm slot gap, chassis mount, bulk package.","salesMarkdown":"## Slot sensor with a PNP output — what that means for your input card The Omron EE-SX671P is a through-beam slot sensor with a 5 mm gap and a PNP open-collector output. It runs on a 5 V supply and switches up to 12 mA with a 1 ms response time. If your PLC or controller input card expects PNP (sourcing) logic, this sensor connects directly — no pull-up resistor or level shifter needed. The narrow slot is sized for flag detection, edge counting on thin webs, or position verification of small parts; it will not cover a wide object presence zone. ## Active lifecycle — no last-time-buy pressure The EE-SX671P is listed as Active in production. It can be specified into new BOMs without near-term end-of-life risk. ## Mounting and wiring — chassis-mount, no connector Chassis-mount package with wire leads — no connector. The 5 V supply rail must be clean; switching transients can couple into the 1 ms response window.","metaTitle":"Omron EE-SX671P Through-Beam Slot Sensor, PNP Open Collector, 5V","metaDescription":"Omron EE-SX671P active through-beam slot sensor, PNP open collector output, 5V supply, 1 ms response, 5 mm slot. Sourced to order — request quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"has_mpn":"EE-SX671","output_type":"PNP - Open Collector","package_type":"Bulk","sensing_type":"Through-Beam","mounting_type":"Chassis Mount","product_status":"Active","lifecycle_stage":"current","response_time_ms":"1.0","supply_voltage_v":"5.0","switching_current_a":"0.012","sensing_distance_max_mm":"0.197","Operating Temperature High":"-25°C to 55°C(TA)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$28.63","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://www.ia.omron.com:443/data_pdf/cat/ee-sx47_67_ds_e_13_2_csm483.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the output type of EE-SX671P? Is it NPN or PNP?","answer":"The EE-SX671P has a PNP open-collector output. It sources current to the load when the beam is interrupted."},{"question":"Can EE-SX671P be used with a 5V supply or with Arduino?","answer":"Yes, the EE-SX671P runs on a 5 V supply and its PNP output can drive a 5 V Arduino digital input directly — no level shifting required. The 12 mA switching current is within Arduino GPIO sink limits."},{"question":"What is the replacement or equivalent for EE-SX671P?","answer":"No direct replacement is listed by Omron. The EE-SPX613 is a through-beam slot sensor but has an NPN output with selectable light/dark logic — not a pin-compatible swap. Verify your input card logic before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/omron/EE-SX671P","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/omron/EE-SX671P when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}