{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ECS-2200B-800","brand":"ECS Inc.","brandSlug":"ecs-inc","productSlug":"ECS-2200B-800","canonicalUrl":"https://icboms.com/ecs-inc/ECS-2200B-800","factsUrl":"https://icboms.com/api/mcp/products/ECS-2200B-800","rawCanonicalId":null},"summary":{"shortDescription":"ECS Inc. ECS-2200 XO (Standard), 80 MHz, HCMOS/TTL dual-output, 5V, ±50ppm, through-hole 8-DIP metal can, Enable/Disable function, commercial 0°C~70°C.","salesMarkdown":"## 80 MHz clock source in a through-hole metal can The ECS-2200B-800 is a 5 V crystal oscillator in the ECS-2200 series, delivering an 80 MHz clock in HCMOS and TTL dual-output format inside a through-hole 8-DIP (4-lead, half-size metal can) package. ## Dual-logic outputs and the Enable/Disable pin Both HCMOS and TTL levels on the same device means it drives whatever logic family the downstream IC prefers without level-shifting circuitry — a useful feature when a board mixes legacy TTL glue logic with modern HCMOS buffers or FPGAs. The Enable/Disable control pin lets the oscillator be powered down without removing the supply rail, dropping current draw to near zero — useful for power-saving modes in instrumentation or bus-hold clock distribution where the clock is gated by downstream logic. ## Supply current and thermal headroom Maximum supply current is 77 mA, which is the figure to use for power budget calculations; the oscillator dissipates roughly 385 mW internally at 5 V. ## Frequency stability and the commercial temperature constraint ±50 ppm frequency stability over the commercial temperature band is the standard grade for this series — adequate for digital logic clocks, microcontroller timing references, and UART clock domains where a few tens of ppm drift across temperature is well within the baud-rate tolerance. The 0°C lower limit excludes outdoor or unheated industrial deployments without enclosure climate control; for those environments a -40°C industrial-grade oscillator would be the correct step up from this series.","metaTitle":"ECS-2200B-800 Crystal Oscillator, 80 MHz","metaDescription":"ECS-2200B-800 XO, 80 MHz, HCMOS/TTL output, 5V, ±50ppm, 0°C~70°C. Active status. Quoted to order — confirm current pricing and lead time at RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Crystals & Oscillators"],"specifications":{"Mfr":"ECS Inc.","Type":"XO (Standard)","Output":"HCMOS, TTL","Series":"ECS-2200","Package":"Tube","Ratings":"-","Function":"Enable/Disable","Frequency":"80 MHz","Mounting Type":"Through Hole","Base Resonator":"Crystal","Package / Case":"8-DIP, 4 Leads (Half Size, Metal Can)","Product Status":"Active","lifecycle_stage":"unknown","Size / Dimension":"0.520\\\" L x 0.520\\\" W (13.20mm x 13.20mm)","Voltage - Supply":"5V","Frequency Stability":"±50ppm","Height - Seated (Max)":"0.213\\\" (5.40mm)","Operating Temperature":"0°C~70°C","Current - Supply (Max)":"77mA","Absolute Pull Range (APR)":"-","Spread Spectrum Bandwidth":"-","Current - Supply (Disable) (Max)":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.1500","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/5a9959f0e7592f61d5a364e6543f6b9e.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/ECS-2200B-800/alternatives.json"},"ai":{"faq":[{"question":"What is the Enable/Disable function on the ECS-2200B-800?","answer":"The Enable/Disable pin gates the oscillator output without removing the 5 V supply rail. When disabled, the output goes to a defined high-impedance or logic-high state (confirm the datasheet for the exact disabled output level) and supply current drops from the 77 mA maximum to a low-standby level, making it suitable for clock domains that need to be shut down under firmware control."},{"question":"What is the difference between HCMOS and TTL output levels on this part?","answer":"The ECS-2200B-800 drives both output types simultaneously from the same crystal reference. HCMOS output swings rail-to-rail (0 V to near 5 V) and sources/sinks current symmetrically, while TTL output sits around 0 V to 3.5 V nominal with asymmetric drive characteristics — the part manages both, so the downstream logic family picks which output pin it uses."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/ecs-inc/ECS-2200B-800","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/ecs-inc/ECS-2200B-800 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}