{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DSC2130FE1-C0003T","brand":"Microchip Technology","brandSlug":"microchip","productSlug":"DSC2130FE1-C0003T","canonicalUrl":"https://icboms.com/microchip/DSC2130FE1-C0003T","factsUrl":"https://icboms.com/api/mcp/products/DSC2130FE1-C0003T","rawCanonicalId":null},"summary":{"shortDescription":"Microchip Technology DSC2130FE1-C0003T, XO (Standard) LVDS oscillator, MEMS resonator, dual output 100MHz and 150MHz, ±50ppm stability, 2.25V to 3.6V supply, 14-SMD no-lead package.","salesMarkdown":"## Dual-frequency LVDS clock for tight timing budgets The LVDS output pairs with high-speed serial interfaces (Gigabit Ethernet, FPGA transceivers, SerDes) where common-mode noise rejection matters. The package is supplied on tape and reel, ready for automated pick-and-place. ## Supply voltage flexibility and LVDS signal integrity The supply voltage range is 2.25V to 3.6V, covering 2.5V and 3.3V rails commonly found in networking and FPGA boards. The LVDS output swings to a differential voltage that meets the ANSI/TIA/EIA-644 standard, so it can drive a 100-ohm termination directly. The enable/disable function is active-low; pulling the enable pin low tri-states the output, which helps during board-level test or when the downstream device is not ready to receive a clock.","metaTitle":"DSC2130FE1-C0003T LVDS MEMS Oscillator – 100/150MHz, ±50ppm","metaDescription":"Microchip DSC2130FE1-C0003T XO (Standard) LVDS oscillator, dual output 100MHz & 150MHz, ±50ppm stability, 2.25-3.6V supply, active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Crystals & Oscillators"],"specifications":{"Mfr":"Microchip Technology","Type":"XO (Standard)","Height":"0.035\\\" (0.90mm)","Output":"LVDS","Series":"DSC2130","Package":"Tape & Reel (TR)","Function":"Enable/Disable","Base Resonator":"MEMS","Package / Case":"14-SMD, No Lead","Product Status":"Active","lifecycle_stage":"eol_hot","Size / Dimension":"0.126\\\" L x 0.098\\\" W (3.20mm x 2.50mm)","Voltage - Supply":"2.25V ~ 3.6V","Base Product Number":"DSC2130","Frequency Stability":"±50ppm","Frequency - Output 1":"100MHz, 150MHz","Frequency - Output 2":"-","Operating Temperature":"-20°C~70°C","Current - Supply (Max)":"32mA","Current - Supply (Disable) (Max)":"23 mA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/64ba5619de63f51d4e6df01a02b8b3ab.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the frequency stability of the DSC2130FE1-C0003T?","answer":"The DSC2130FE1-C0003T is specified with a frequency stability of ±50ppm over the -20°C to +70°C operating temperature range. This includes the combined effects of temperature, supply voltage variation, and aging."},{"question":"Does the DSC2130FE1-C0003T have an enable/disable function?","answer":"Yes, the DSC2130FE1-C0003T includes an enable/disable function. When the enable pin is pulled low, the output is disabled (tri-state) and the supply current drops to 23 mA max. When enabled, the active supply current is 32 mA max."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/microchip/DSC2130FE1-C0003T","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/microchip/DSC2130FE1-C0003T when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}