{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DSC1033DI2-060.0700T","brand":"Microchip Technology","brandSlug":"microchip","productSlug":"DSC1033DI2-060.0700T","canonicalUrl":"https://icboms.com/microchip/DSC1033DI2-060.0700T","factsUrl":"https://icboms.com/api/mcp/products/DSC1033DI2-060.0700T","rawCanonicalId":null},"summary":{"shortDescription":"Microchip Technology DSC1033DI2-060.0700T, PureSilicon™ MEMS XO, 60.07 MHz, CMOS output, ±25 ppm stability, 3.3 V supply, 4-SMD package.","salesMarkdown":"## 60.07 MHz MEMS clock with ±25 ppm hold over temperature The DSC1033DI2-060.0700T: At 60 MHz, ±25 ppm means the clock edge can drift up to ±1500 Hz — still inside the tolerance for a 100BASE-TX Ethernet PHY or a high-speed MCU PLL reference without re-centering the oscillator. Supply current is 4 mA typical at 3.3 V — the MEMS die draws less than a quartz crystal oscillator at the same frequency, which matters when the oscillator is one of several on a power-constrained board. ## Standby function cuts draw to 1 µA The output goes high-Z when disabled — no pull-up resistor needed on the clock line. ## 2.5 × 2.0 mm 4-SMD — layout constraints Housed in a 2.50 × 2.00 mm 4-SMD package with 0.90 mm seated height. The land pattern is 1.2 × 1.2 mm per pad on a 1.27 mm pitch — a four-layer board with micro-vias can route the output trace under the part, but a two-layer board needs a via right at the pad to escape the fan-out. The 0.90 mm height clears most 1.6 mm PCB standoffs.","metaTitle":"DSC1033DI2-060.0700T MEMS XO, 60.07 MHz, CMOS, ±25 ppm","metaDescription":"Microchip DSC1033DI2-060.0700T: 60.07 MHz MEMS oscillator, CMOS output, ±25 ppm stability, -40°C to +85°C, 3.3 V, 4-SMD. Active production, sourced per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Crystals & Oscillators"],"specifications":{"Mfr":"Microchip Technology","Type":"XO (Standard)","Output":"CMOS","Series":"DSC1033, PureSilicon™","Package":"Tape & Reel (TR)","Ratings":"-","Function":"Standby (Power Down)","Frequency":"60.07 MHz","Mounting Type":"Surface Mount","Base Resonator":"MEMS","Package / Case":"4-SMD, No Lead","Product Status":"Active","lifecycle_stage":"eol_hot","Size / Dimension":"0.098\\\" L x 0.079\\\" W (2.50mm x 2.00mm)","Voltage - Supply":"3.3V","Base Product Number":"DSC1033","Frequency Stability":"±25ppm","Height - Seated (Max)":"0.035\\\" (0.90mm)","Operating Temperature":"-40°C~85°C","Current - Supply (Max)":"4mA (Typ)","Absolute Pull Range (APR)":"-","Spread Spectrum Bandwidth":"-","Current - Supply (Disable) (Max)":"1µA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/39044fcc9825a23a0d54b2590f18614f.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the frequency stability of DSC1033DI2-060.0700T?","answer":"This includes initial tolerance, temperature drift, and aging — no external trim capacitor needed."},{"question":"Does DSC1033DI2-060.0700T have a standby function?","answer":"The output goes high-impedance when disabled."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/microchip/DSC1033DI2-060.0700T","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/microchip/DSC1033DI2-060.0700T when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}