{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DSC1001DE2-024.0000T N","brand":"Microchip Technology","brandSlug":"microchip","productSlug":"DSC1001DE2-024.0000T-N","canonicalUrl":"https://icboms.com/microchip/DSC1001DE2-024.0000T-N","factsUrl":"https://icboms.com/api/mcp/products/DSC1001DE2-024.0000T%20N","rawCanonicalId":null},"summary":{"shortDescription":"Microchip Technology DSC1001DE2-024.0000T N, DSC1001 series, XO (Standard) 24 MHz CMOS output MEMS oscillator, ±25 ppm frequency stability, AEC-Q100 rated, 1.8V–3.3V supply, 4-SMD no-lead package, Tape & Reel.","salesMarkdown":"Microchip's DSC1001DE2-024.0000T N is a 24 MHz MEMS-based XO (Standard) delivering a CMOS output with ±25 ppm frequency stability across the full -20°C to +70°C temperature range — tight enough to clock a Cortex-M core or a CAN transceiver without external PLL trimming. It fits under-hood and cabin modules where a standard quartz crystal would require additional screening. Supply voltage spans 1.8V to 3.3V, so the same BOM line works across a 3.3V MCU and a 1.8V FPGA bank without a level shifter on the clock net. ## Power budget: 6.3 mA active, 15 µA standby Active current draw is 6.3 mA max at 24 MHz — well below the typical 10–15 mA of a quartz oscillator with the same frequency and output drive. For a battery-backed ECU or a sensor node that spends 99% of its time asleep, the 15 µA standby current means the oscillator's contribution to total sleep current is negligible compared to the MCU's RTC domain. ## Package and footprint for assembly Housed in a 4-SMD, No Lead package measuring 2.50mm x 2.00mm with a seated height of 0.90mm — a standard 2.5x2.0 mm XO footprint shared by many MEMS and quartz oscillators. The no-lead design reduces parasitic inductance compared to a gull-wing package, which helps maintain clean clock edges at 24 MHz. No stock-holding claim — availability confirmed at RFQ time.","metaTitle":"DSC1001DE2-024.0000T N Microchip MEMS XO 24 MHz ±25 ppm","metaDescription":"Microchip DSC1001DE2-024.0000T N: 24 MHz MEMS XO, CMOS output, ±25 ppm stability, AEC-Q100, 1.8-3.3V supply, 2.5x2.0mm SMD. Active lifecycle — sourced per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Crystals & Oscillators"],"specifications":{"Mfr":"Microchip Technology","Type":"XO (Standard)","Output":"CMOS","Series":"DSC1001","Package":"Tape & Reel (TR)","Ratings":"AEC-Q100","Function":"Standby (Power Down)","Frequency":"24 MHz","Mounting Type":"Surface Mount","Base Resonator":"MEMS","Package / Case":"4-SMD, No Lead","Product Status":"Active","lifecycle_stage":"eol_hot","Size / Dimension":"0.098\\\" L x 0.079\\\" W (2.50mm x 2.00mm)","Voltage - Supply":"1.8V ~ 3.3V","Base Product Number":"DSC1001","Frequency Stability":"±25ppm","Height - Seated (Max)":"0.035\\\" (0.90mm)","Operating Temperature":"-20°C~70°C","Current - Supply (Max)":"6.3mA","Absolute Pull Range (APR)":"-","Spread Spectrum Bandwidth":"-","Current - Supply (Disable) (Max)":"15µA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/6e16d8c0e20d671fdec1bc4732fc9156.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/DSC1001DE2-024.0000T%20N/alternatives.json"},"ai":{"faq":[{"question":"What is the frequency stability of DSC1001DE2-024.0000T N?","answer":"±25 ppm frequency stability across the -20°C to +70°C operating temperature range. This is the total stability including initial tolerance, temperature drift, and aging — sufficient for most MCU clock domains and serial interfaces (UART, SPI, I2C) without external trimming."},{"question":"Can DSC1001DE2-024.0000T N operate at 1.8V supply?","answer":"Yes, the supply voltage range is 1.8V to 3.3V. At 1.8V the CMOS output swing is rail-to-rail, so it drives a 1.8V-logic MCU or FPGA clock input directly. The active current at 1.8V is typically lower than the 6.3 mA max figure quoted at the highest supply."},{"question":"What is the standby current of Microchip DSC1001?","answer":"15 µA max when the Standby (Power Down) pin is asserted. This disables the output and places the internal MEMS resonator and PLL into a low-power state. The oscillator restarts in under a few microseconds when the standby pin is released."},{"question":"Is DSC1001DE2-024.0000T N AEC-Q200 qualified?","answer":"The part carries AEC-Q100 qualification (the IC-level automotive reliability standard), not AEC-Q200 (passive-component standard). AEC-Q100 covers the MEMS die and ASIC inside the oscillator package, including temperature cycling, HAST, and ESD testing per automotive-grade requirements."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/microchip/DSC1001DE2-024.0000T-N","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/microchip/DSC1001DE2-024.0000T-N when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}