{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DS1804-010+","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"DS1804-010","canonicalUrl":"https://icboms.com/analog-devices/DS1804-010","factsUrl":"https://icboms.com/api/mcp/products/DS1804-010%2B","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices DS1804-010+, 10kΩ digital potentiometer, 100 taps, linear taper, non-volatile memory, 2.7V to 5.5V supply, -40°C to 85°C, 8-DIP through-hole package.","salesMarkdown":"## What the DS1804-010+ does in a design The DS1804-010+ is a single-channel, 100-tap digital potentiometer with a linear taper and a total end-to-end resistance of 10kΩ. It stores the wiper position in non-volatile memory, so the setting survives power cycling — no need to re-initialize at boot. The 3-wire up/down interface (U/D, INC, CS) is straightforward to drive from a microcontroller GPIO, and the supply range from 2.7V to 5.5V covers both 3.3V and 5V logic rails. Typical applications include trimming reference voltages, setting comparator thresholds, adjusting gain in op-amp circuits, and calibrating sensor offsets in industrial control or instrumentation. ## Package and mounting — through-hole for prototyping and low-volume production Housed in an 8-pin DIP package (0.300\" body width, 7.62mm pitch), the DS1804-010+ is through-hole only. That makes it a natural fit for breadboard prototyping, socketed designs, and low-volume or repair applications where hand-assembly is preferred. The 8-PDIP footprint is a standard layout, and the 400Ω typical wiper resistance is low enough not to distort the divider ratio at the 10kΩ end-to-end value. ## Temperature coefficient and tolerance — what they mean for your calibration budget The ±20% resistance tolerance means the absolute end-to-end resistance can vary from 8kΩ to 12kΩ across parts — fine for ratiometric applications like a voltage divider, but not for setting an absolute current limit without a trim step. The 750ppm/°C temperature coefficient is typical for a digital pot of this generation; a 50°C temperature swing shifts the resistance by about 3.75%, which matters if the pot sets a precision bias in a temperature-varying environment. For tight calibration loops, plan for a one-time calibration at the system level. ## Lifecycle and sourcing — active, no end-of-life concern The DS1804-010+ carries an active lifecycle status with ROHS3 compliance.","metaTitle":"DS1804-010+ Digital Potentiometer, 10kΩ, 100 Taps, Linear","metaDescription":"DS1804-010+ 10kΩ digital pot, 100 taps, linear taper, non-volatile memory, 2.7V-5.5V, -40°C to 85°C, 8-DIP. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Taper":"Linear","Package":"Tube","Interface":"Up/Down (U/D, INC, CS)","Tolerance":"±20%","Memory Type":"Non-Volatile","Configuration":"Potentiometer","Mounting Type":"Through Hole","Number of Taps":"100","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Voltage - Supply":"2.7V ~ 5.5V","Resistance (Ohms)":"10k","Number of Circuits":"1","Operating Temperature":"-40°C ~ 85°C","Supplier Device Package":"8-PDIP","Temperature Coefficient (Typ)":"750ppm/°C","Resistance - Wiper (Ohms) (Typ)":"400"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.09","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$5.09000","currency":"USD"},{"qty":10,"price":"$4.56700","currency":"USD"},{"qty":25,"price":"$4.31760","currency":"USD"},{"qty":100,"price":"$3.74200","currency":"USD"},{"qty":250,"price":"$3.55016","currency":"USD"},{"qty":500,"price":"$3.18554","currency":"USD"},{"qty":1000,"price":"$2.68660","currency":"USD"},{"qty":2500,"price":"$2.55227","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/56d895d291ba13a030ade422b65102e0.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the taper of the DS1804-010+?","answer":"The DS1804-010+ uses a linear taper, meaning the resistance between the wiper and either end changes linearly with the tap position. It is not a logarithmic (audio) taper."},{"question":"What are the alternatives to the DS1804-010+?","answer":"Within the same DS1804 family, parts differ by resistance value (e.g., DS1804-050+ is 50kΩ, DS1804-100+ is 100kΩ) while maintaining the same 100-tap linear taper, non-volatile memory, and 8-DIP footprint. For a pin-compatible alternative with a different resistance, select the variant that matches your divider ratio."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/DS1804-010","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/DS1804-010 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}