{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV8844PWP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV8844PWP","canonicalUrl":"https://icboms.com/texas-instruments/DRV8844PWP","factsUrl":"https://icboms.com/api/mcp/products/DRV8844PWP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV8844PWP, Driver - Fully Integrated, Control and Power Stage, Power MOSFET, Parallel Interface, 8V ~ 60V Supply/Load, 1.75A Output, 28-PowerTSSOP (HTSSOP), -40°C to 150°C.","salesMarkdown":"## 28-HTSSOP motor driver with 1.75 A bridges and 60 V supply ceiling The Texas Instruments DRV8844PWP is a fully integrated motor driver combining control logic and power stage in a single 28-HTSSOP package. It drives bipolar stepper motors or brushed DC motors using four half-bridge outputs, each rated for 1.75 A continuous. The supply and load voltage range spans 8 V to 60 V. A parallel interface simplifies connection to a host MCU or motion controller. The junction temperature rating of -40°C to 150°C qualifies it for motor-drive enclosures, automotive under-hood zones, and factory-floor automation where ambient heat is a given. ## 1.75 A per bridge — what it means for your motor load Each of the four half-bridges delivers 1.75 A continuous. For a bipolar stepper, two bridges drive one winding in series; the winding current is the bridge current, so a 1.75 A-rated stepper coil is the practical ceiling. For brushed DC motors, two bridges can be paralleled per motor to push the current budget higher, but the package thermal limit (PowerPAD-soldered to a copper plane) governs the real-world derating. At 60 V supply and full current, expect to keep the HTSSOP pad area well-ventilated or forced-air cooled. ## 8 V to 60 V — one rail, no external regulator The supply voltage and load voltage share the same 8 V to 60 V range, so the driver runs directly off the motor bus. That eliminates a separate logic supply regulator in many designs — the internal charge pump generates the gate-drive voltage from the main rail. Watch the lower end: at 8 V the charge pump still functions, but margin for brownout or sagging rails is thin. ## Active lifecycle — no LTB pressure for new builds The DRV8844PWP carries an Active product status with ROHS3 compliance. There is no last-time-buy notice or NRND flag on this part. For a BOM freeze or a new design start, the Active status means standard distribution pipelines are open and no forced-migration timeline exists. The 28-HTSSOP package is a common TI footprint, so second-source options (see FAQ for the DRV8811PWPR comparison) exist if dual-sourcing is required.","metaTitle":"TI DRV8844PWP Motor Driver, 1.75 A, 8-60 V, 28-HTSSOP","metaDescription":"DRV8844PWP fully integrated bipolar stepper/brushed DC driver. 1.75 A per bridge, 8-60 V supply, parallel interface, -40 to 150°C. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tube","Function":"Driver - Fully Integrated, Control and Power Stage","Interface":"Parallel","Technology":"Power MOSFET","Applications":"General Purpose","Mounting Type":"Surface Mount","Package / Case":"28-PowerTSSOP (0.173\\\", 4.40mm Width)","Voltage - Load":"8V ~ 60V","lifecycle_stage":"eol_hot","Current - Output":"1.75A","Voltage - Supply":"8V ~ 60V","Motor Type - AC, DC":"Brushed DC","Motor Type - Stepper":"Bipolar","Output Configuration":"Half Bridge (4)","Operating Temperature":"-40°C ~ 150°C (TJ)","Supplier Device Package":"28-HTSSOP"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.67","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$5.67000","currency":"USD"},{"qty":10,"price":"$5.09600","currency":"USD"},{"qty":25,"price":"$4.81760","currency":"USD"},{"qty":100,"price":"$4.17530","currency":"USD"},{"qty":250,"price":"$3.96120","currency":"USD"},{"qty":500,"price":"$3.55440","currency":"USD"},{"qty":1000,"price":"$3.03000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/9e6761eb99a680426a2c318f5bd90f64.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can DRV8844PWP drive a bipolar stepper motor at 1.75 A?","answer":"Yes. The four half-bridge outputs are configured as two full H-bridges for a bipolar stepper. Each winding sees 1.75 A continuous, matching many NEMA 17 and small NEMA 23 stepper motors. Ensure the PowerPAD is soldered to a copper plane for thermal management at full current."},{"question":"What is the closest functional equivalent to DRV8844PWP?","answer":"The DRV8811PWPR is a near-functional match: same half-bridge (4) output configuration, bipolar stepper support, and -40°C to 150°C temperature range. Its output current is 1.9 A versus the DRV8844PWP's 1.75 A, and its supply voltage range starts at 8 V (versus 8 V minimum). The package differs — the DRV8811PWPR ships in Tape & Reel. Pin compatibility should be verified against the respective datasheets before substitution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV8844PWP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV8844PWP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}