{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV8835DSSR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV8835DSSR","canonicalUrl":"https://icboms.com/texas-instruments/DRV8835DSSR","factsUrl":"https://icboms.com/api/mcp/products/DRV8835DSSR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV8835DSSR, Fully Integrated Motor Driver, Control and Power Stage, Power MOSFET, 1.5 A Output, 2 V to 7 V Supply, 0 V to 11 V Load, Parallel Interface, 12-WFDFN Exposed Pad / 12-WSON (2x3 mm), -40°C to 150°C Junction.","salesMarkdown":"The Texas Instruments DRV8835DSSR is a fully integrated motor driver that combines the control logic, gate drive, and power MOSFET output stage in a single 12-WSON (2x3 mm) package. It is designed for battery-powered applications where board space and efficiency matter. The part integrates four half-bridges, each rated for 1.5 A continuous output current, with a supply range of 2 V to 7 V and a load voltage range from 0 V to 11 V. This makes it suitable for driving small brushed DC motors or a single bipolar stepper motor in portable devices, robotics, and consumer electronics. ## Parallel interface — direct GPIO control The parallel interface means the driver is controlled by simple logic-level signals from a microcontroller, without needing a serial bus like SPI or I2C. Each half-bridge can be independently set to drive, brake, or coast by toggling the appropriate input pins. ## 150°C junction — thermal headroom for motor stalls In a motor driver, the 150°C ceiling is the key derating parameter: during a locked-rotor or stall condition, the output current can spike and the die temperature rises rapidly. The wide junction rating gives the thermal shutdown circuit time to react before damage occurs. The exposed pad on the 12-WSON package (2x3 mm) should be soldered to a PCB copper plane for effective heat sinking. For a BOM line, this means no supply-chain disruption from a sudden discontinuation — it can be qualified into a new design with confidence. ## Two brushed DC motors or one bipolar stepper With four half-bridges, the DRV8835DSSR can drive two independent brushed DC motors (one half-bridge per motor terminal) or a single bipolar stepper motor (two half-bridges per coil). The 1.5 A per-bridge rating applies to both configurations. For a stepper, full-step, half-step, and microstepping drive patterns are implemented in the MCU firmware through the parallel input pins — the driver itself does not include a sequencer, so the step timing is entirely under software control.","metaTitle":"DRV8835DSSR motor driver, 1.5 A, 2-7 V supply, 12-WSON","metaDescription":"TI DRV8835DSSR fully integrated motor driver: 1.5 A output, 2-7 V supply, 0-11 V load, parallel interface, 12-WSON (2x3 mm). Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Function":"Driver - Fully Integrated, Control and Power Stage","Interface":"Parallel","Technology":"Power MOSFET","Applications":"Battery Powered","Mounting Type":"Surface Mount","Package / Case":"12-WFDFN Exposed Pad","Voltage - Load":"0V ~ 11V","lifecycle_stage":"eol_hot","Current - Output":"1.5A","Voltage - Supply":"2V ~ 7V","Motor Type - AC, DC":"Brushed DC","Motor Type - Stepper":"Bipolar","Output Configuration":"Half Bridge (4)","Operating Temperature":"-40°C ~ 150°C (TJ)","Supplier Device Package":"12-WSON (2x3)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.72","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.72000","currency":"USD"},{"qty":10,"price":"$1.54500","currency":"USD"},{"qty":25,"price":"$1.45760","currency":"USD"},{"qty":100,"price":"$1.24190","currency":"USD"},{"qty":250,"price":"$1.16608","currency":"USD"},{"qty":500,"price":"$1.02030","currency":"USD"},{"qty":1000,"price":"$0.84540","currency":"USD"},{"qty":3000,"price":"$0.82505","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/b3547e2e6c836c422824f5ae1deff63d.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the maximum output current and voltage range of DRV8835DSSR?","answer":"The output current rating is 1.5 A per half-bridge. The supply voltage range is 2 V to 7 V, and the load voltage range is 0 V to 11 V."},{"question":"Can DRV8835DSSR drive two brushed DC motors?","answer":"Yes, the four half-bridges can be configured as two independent H-bridges, each driving one brushed DC motor at up to 1.5 A. Alternatively, all four half-bridges can drive a single bipolar stepper motor."},{"question":"Does DRV8835DSSR have a pin-compatible replacement?","answer":"The DRV8811PWPR is a functional peer with a higher load voltage (8 V) and output current (1.9 A), but it uses a different package (HTSSOP-28) and a logic-level interface rather than parallel. It is not pin-compatible with the 12-WSON footprint of the DRV8835DSSR."},{"question":"How do I interface DRV8835DSSR with a 3.3 V microcontroller?","answer":"The parallel interface accepts logic-level inputs within the 2 V to 7 V supply range, so a 3.3 V MCU can drive the input pins directly without level shifters. Each input controls the state of one half-bridge output. The driver's supply voltage can be the same as the MCU's 3.3 V rail or a separate 2 V to 7 V supply."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV8835DSSR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV8835DSSR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-16T10:39:33.080Z","lastPublished":"2026-07-16T10:39:33.080Z","indexable":true}}