{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV8833PWR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV8833PWR","canonicalUrl":"https://icboms.com/texas-instruments/DRV8833PWR","factsUrl":"https://icboms.com/api/mcp/products/DRV8833PWR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV8833PWR, dual H-bridge motor driver, 1.5 A continuous output per bridge, 2.7 V to 10.8 V supply, PWM interface, 16-TSSOP package, -40°C to 150°C junction temperature.","salesMarkdown":"## What this dual H-bridge driver does on the BOM The Texas Instruments DRV8833PWR is a fully integrated dual H-bridge motor driver built with NMOS output stages, intended for brushed DC motors or one bipolar stepper motor. Each H-bridge is rated for 1.5 A continuous output current, and the supply and motor voltage range spans 2.7 V to 10.8 V. The 1.5 A continuous rating is per H-bridge, not summed across both. If you are driving two brushed DC motors simultaneously, each bridge can deliver 1.5 A to its own load. For a single bipolar stepper, the two bridges combine to handle the two winding phases, and the total motor current is limited by the winding resistance and the supply voltage. At 1.5 A per bridge, the 16-TSSOP package's thermal impedance becomes the real limiter. The 150°C TJ ceiling gives headroom, but in a 85°C ambient with both bridges loaded, the copper pour on the PCB is what keeps the die temperature in check. ## Supply range and application fit Typical applications include battery-operated toys, portable pumps, solenoid drivers, and general-purpose DC motor control where board space is tight. The NMOS output stage gives low on-resistance, so the driver stays cool at moderate currents. The 16-TSSOP package has a 0.65 mm pin pitch and a 4.40 mm body width. The package is MSL-1 typical for TI motor drivers, so no bake-out needed before reflow.","metaTitle":"DRV8833PWR Dual Brushed DC Motor Driver, 1.5 A, 16-TSSOP","metaDescription":"DRV8833PWR from Texas Instruments: dual H-bridge motor driver, 1.5 A continuous output, 2.7 V to 10.8 V supply, PWM interface, -40°C to 150°C junction range","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Function":"Driver - Fully Integrated, Control and Power Stage","Interface":"PWM","Technology":"NMOS","Applications":"DC Motors, General Purpose, Solenoids","Mounting Type":"Surface Mount","Package / Case":"16-TSSOP (0.173\\\", 4.40mm Width)","Product Status":"Active","Voltage - Load":"2.7V ~ 10.8V","Step Resolution":"-","lifecycle_stage":"eol_hot","Current - Output":"1.5A","Voltage - Supply":"2.7V ~ 10.8V","Base Product Number":"DRV8833","Motor Type - AC, DC":"Brushed DC","Motor Type - Stepper":"Bipolar","Output Configuration":"Half Bridge (4)","Operating Temperature":"-40°C~150°C(TJ)","Supplier Device Package":"16-TSSOP"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.5000","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/af070ad953352d7a4bd1deafaa375c26.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/DRV8833PWR/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum current of DRV8833PWR?","answer":"The DRV8833PWR is rated for 1.5 A continuous output current per H-bridge. For a bipolar stepper motor, the two bridges combine to handle the winding phases, but the per-bridge current limit still applies."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV8833PWR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV8833PWR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}