{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV8833PWPR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV8833PWPR","canonicalUrl":"https://icboms.com/texas-instruments/DRV8833PWPR","factsUrl":"https://icboms.com/api/mcp/products/DRV8833PWPR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV8833PWPR, Dual H-Bridge Motor Driver, Fully Integrated Control and Power Stage, 1.5A Output, 2.7V-10.8V Supply, PWM Interface, 16-HTSSOP Package, -40°C to 150°C Junction.","salesMarkdown":"## Motor-drive BOM fit: dual H-bridge in a 16-pin HTSSOP It drives two brushed DC motors independently or one bipolar stepper motor, controlled directly by PWM signals from a microcontroller. Each bridge delivers up to 1.5 A continuous output current, with a supply range of 2.7 V to 10.8 V. ## 1.5 A per bridge — sizing the load and the thermal pad The 1.5 A continuous rating per H-bridge is the spec that drives the load budget: two brushed DC motors at 1.5 A each, or a bipolar stepper drawing up to 1.5 A per phase. ## PWM control — no SPI, no I2C, just two pins per bridge The interface is plain PWM: one input per half-bridge, so four PWM pins from the MCU control both motors or the stepper. There is no serial bus overhead — the firmware just toggles GPIOs. This keeps the MCU selection simple; any controller with four timer outputs works. Logic inputs are referenced to the device supply voltage (VCC), which can be as low as 2.7 V — so logic is directly compatible. No level shifter needed between an MCU and the driver.","metaTitle":"DRV8833PWPR Dual H-Bridge Motor Driver, 1.5A, 16-HTSSOP","metaDescription":"Texas Instruments DRV8833PWPR dual H-bridge motor driver, 1.5A per bridge, 2.7V-10.8V supply, PWM interface, -40°C to 150°C junction. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Function":"Driver - Fully Integrated, Control and Power Stage","Interface":"PWM","Technology":"NMOS","Applications":"DC Motors, General Purpose, Solenoids","Mounting Type":"Surface Mount","Package / Case":"16-PowerTSSOP (0.173\\\", 4.40mm Width)","Product Status":"Active","Voltage - Load":"2.7V ~ 10.8V","Step Resolution":"-","lifecycle_stage":"eol_hot","Current - Output":"1.5A","Voltage - Supply":"2.7V ~ 10.8V","Base Product Number":"DRV8833","Motor Type - AC, DC":"Brushed DC","Motor Type - Stepper":"Bipolar","Output Configuration":"Half Bridge (4)","Operating Temperature":"-40°C~150°C(TJ)","Supplier Device Package":"16-HTSSOP"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.18841","priceTiers":[{"qty":1,"price":"$2.18841","currency":"USD"},{"qty":10,"price":"$1.86830","currency":"USD"},{"qty":30,"price":"$1.66785","currency":"USD"},{"qty":100,"price":"$1.46351","currency":"USD"},{"qty":500,"price":"$1.41331","currency":"USD"},{"qty":1000,"price":"$1.37279","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/af070ad953352d7a4bd1deafaa375c26.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/DRV8833PWPR/alternatives.json"},"ai":{"faq":[{"question":"What is the output current rating of DRV8833PWPR?","answer":"Each H-bridge is rated for 1.5 A continuous output current. The total current through the device is limited by the junction temperature, which must stay within -40°C to 150°C."},{"question":"Can DRV8833PWPR drive a stepper motor?","answer":"Yes. The four half-bridges can be configured as two full H-bridges to drive a bipolar stepper motor. The PWM inputs control the phase currents directly."},{"question":"Is DRV8833PWPR compatible with 3.3V logic inputs?","answer":"Yes. The logic supply range (VCC) is 2.7 V to 10.8 V, so a 3.3 V MCU output drives the PWM inputs directly without level translation."},{"question":"Does DRV8833PWPR have overcurrent protection?","answer":"The evidence does not list overcurrent protection as a feature. The device includes internal NMOS FETs with typical Rds(on) in the datasheet; external current sensing or a fuse is recommended for fault-tolerant designs."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV8833PWPR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV8833PWPR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-13T09:45:01.929Z","lastPublished":"2026-08-13T09:45:01.929Z","indexable":true}}