{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV8833CPWP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV8833CPWP","canonicalUrl":"https://icboms.com/texas-instruments/DRV8833CPWP","factsUrl":"https://icboms.com/api/mcp/products/DRV8833CPWP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV8833CPWP, Dual H-Bridge Motor Driver, 2.7V–10.8V Supply, 700mA Output per Bridge, PWM Interface, Power MOSFET Technology, 16-PowerTSSOP Package, Active.","salesMarkdown":"## Dual H-Bridge Driver for Two DC Motors or a Bipolar Stepper The Texas Instruments DRV8833CPWP is a fully integrated dual H-bridge motor driver with PWM control, built around Power MOSFET technology. It drives either two brushed DC motors or one bipolar stepper motor, with each half-bridge rated for 700 mA continuous output current. The supply and load voltage share the same 2.7 V to 10.8 V range, so the motor supply rail also powers the internal logic — no separate regulator needed for the driver core. ## 2.7 V to 10.8 V — One Rail for Logic and Motor That range covers common 3.3 V, 5 V, and 9 V system rails, but the 10.8 V ceiling means a nominal 12 V bus is out of spec — a common first-fit check for industrial or automotive designs. ## Four Half-Bridges, 700 mA Each — What It Drives Four half-bridge outputs configured as two independent H-bridges. Each bridge can drive a brushed DC motor forward/reverse/brake/coast, or both bridges combine to drive a bipolar stepper with full-step, half-step, or microstep sequences via the PWM inputs. The 700 mA per-bridge rating is continuous; peak current can be higher for short intervals during start-up or stall conditions, but the thermal limit in the 16-PowerTSSOP package (with exposed pad) sets the steady-state boundary. ## 16-PowerTSSOP — Thermal Pad Required The PCB layout must include a copper land and vias to the ground plane — without it the junction temperature rises above the 150°C limit at full load in a 25°C ambient. The tube shipping medium is the standard for this package variant; the same die is also available in tape-and-reel as the DRV8833CPWPR.","metaTitle":"DRV8833CPWP Dual H-Bridge Motor Driver, 2.7V–10.8V, 700mA","metaDescription":"DRV8833CPWP dual H-bridge motor driver from TI. 2.7V–10.8V supply, 700mA per bridge, PWM interface, 16-PowerTSSOP. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tube","Function":"Driver - Fully Integrated, Control and Power Stage","Interface":"PWM","Technology":"Power MOSFET","Applications":"DC Motors, General Purpose, Solenoids","Mounting Type":"Surface Mount","Package / Case":"16-PowerTSSOP (0.173\\\", 4.40mm Width)","Product Status":"Active","Voltage - Load":"2.7V ~ 10.8V","Step Resolution":"-","lifecycle_stage":"eol_hot","Current - Output":"700mA","Voltage - Supply":"2.7V ~ 10.8V","Base Product Number":"DRV8833","Motor Type - AC, DC":"Brushed DC","Motor Type - Stepper":"Bipolar","Output Configuration":"Half Bridge (4)","Operating Temperature":"-40°C~150°C(TJ)","Supplier Device Package":"16-HTSSOP"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.0800","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/a51fff8302ec47994a5fd6fcfa1fc701.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/DRV8833CPWP/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between DRV8833CPWP and DRV8833PWP?","answer":"The CPWP suffix indicates the wider temperature grade, making it the appropriate choice for industrial or high-ambient motor-drive environments."},{"question":"Can DRV8833CPWP drive a stepper motor?","answer":"Yes. The four half-bridges can be configured as two full H-bridges to drive a bipolar stepper motor. The PWM interface allows full-step, half-step, and microstep control; the 700 mA per-bridge rating limits the stepper's phase current."},{"question":"Can DRV8833CPWP drive two DC motors simultaneously?","answer":"Yes. The two independent H-bridges each drive one brushed DC motor. Each motor can be controlled independently via the PWM inputs, with forward, reverse, brake, and coast modes available per bridge."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV8833CPWP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV8833CPWP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}