{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV8411ARTER","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV8411ARTER","canonicalUrl":"https://icboms.com/texas-instruments/DRV8411ARTER","factsUrl":"https://icboms.com/api/mcp/products/DRV8411ARTER","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV8411ARTER, Driver - Fully Integrated, Control and Power Stage, Power MOSFET, PWM Interface, 4 A Output, 1.5 V ~ 11 V Supply/Load, 16-WFQFN Exposed Pad, -40°C ~ 125°C.","salesMarkdown":"## Dual H-bridge with 4 A per bridge — what it drives and where The Texas Instruments DRV8411ARTER is a fully integrated dual H-bridge motor driver that packs four half-bridge outputs into a 3 mm × 3 mm QFN package. Each half-bridge can deliver up to 4 A continuous, making the part suitable for driving two brushed DC motors or one bipolar stepper motor from a single supply rail between 1.5 V and 11 V. ## 4 A output current — sizing the load and the thermal budget The 4 A rating per bridge is the headline selection parameter. The 16-WQFN with exposed pad (3 mm × 3 mm) means the PCB copper area and via stitching under the pad are what actually carry the heat away — a layout with inadequate thermal relief will current-limit or thermally cycle before the silicon reaches its 125°C junction limit. For a stepper motor, the 4 A per winding lets you run NEMA 17 and smaller NEMA 23 frames at their rated current without an external current-sense resistor stage, since the DRV8411ARTER integrates the power stage. The ROHS3 compliance also clears European and global regulatory requirements without an exemption expiry to watch. ## PWM interface and integrated power stage — what it simplifies on the board The driver accepts standard PWM signals on its interface, so any microcontroller with timer-generated PWM can control motor speed and direction directly — no additional DAC or serial interface needed. The integrated Power MOSFETs eliminate the need for external FETs and gate-drive circuitry, collapsing what would be a multi-IC solution into a single 16-pin QFN. For a two-axis brushed DC application (e.g., a pump and a fan, or dual-motor positioning stage), one DRV8411ARTER replaces two discrete H-bridge designs and their associated PCB area.","metaTitle":"DRV8411ARTER Dual H-Bridge Motor Driver, 4 A, 1.5–11 V","metaDescription":"Texas Instruments DRV8411ARTER fully integrated dual H-bridge motor driver. 4 A output per bridge, 1.5 V to 11 V supply, PWM interface, -40°C to 125°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Function":"Driver - Fully Integrated, Control and Power Stage","Interface":"PWM","Technology":"Power MOSFET","Applications":"General Purpose","Mounting Type":"Surface Mount","Package / Case":"16-WFQFN Exposed Pad","Voltage - Load":"1.5V ~ 11V","lifecycle_stage":"eol_hot","Current - Output":"4A","Voltage - Supply":"1.5V ~ 11V","Motor Type - AC, DC":"Brushed DC","Motor Type - Stepper":"Bipolar","Output Configuration":"Half Bridge (4)","Operating Temperature":"-40°C ~ 125°C (TA)","Supplier Device Package":"16-WQFN (3x3)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.26","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$2.26000","currency":"USD"},{"qty":10,"price":"$2.03400","currency":"USD"},{"qty":25,"price":"$1.91920","currency":"USD"},{"qty":100,"price":"$1.63500","currency":"USD"},{"qty":250,"price":"$1.53520","currency":"USD"},{"qty":500,"price":"$1.34330","currency":"USD"},{"qty":1000,"price":"$1.11302","currency":"USD"},{"qty":2500,"price":"$1.03626","currency":"USD"},{"qty":5000,"price":"$0.78780","currency":"USD"},{"qty":10000,"price":"$0.75750","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/6d22614043be3ec03b2e7019182ae9e4.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the DRV8411ARTER maximum output current per bridge?","answer":"The DRV8411ARTER is rated for 4 A continuous output per bridge (each half-bridge pair forming one H-bridge). That 4 A is the continuous current the integrated Power MOSFETs can sustain within the package thermal limits when the exposed pad is properly soldered to a sufficient copper area."},{"question":"Can DRV8411ARTER drive a stepper motor?","answer":"Yes. The DRV8411ARTER supports bipolar stepper motors. Its four half-bridge outputs can be configured as two full H-bridges to drive the two windings of a bipolar stepper, with each winding rated for the full 4 A continuous current."},{"question":"Is DRV8411ARTER RoHS compliant?","answer":"Yes, the DRV8411ARTER is ROHS3 compliant, meeting the latest EU RoHS directive without exemptions."},{"question":"Is DRV8411ARTER a direct replacement for DRV8412?","answer":"The evidence does not provide a direct cross-reference between DRV8411ARTER and DRV8412. Both are TI dual H-bridge drivers, but the DRV8411ARTER is a different device variant. Verify pin-compatibility and parametric differences from the respective datasheets before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV8411ARTER","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV8411ARTER when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}