{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV8300UDIPWR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV8300UDIPWR","canonicalUrl":"https://icboms.com/texas-instruments/DRV8300UDIPWR","factsUrl":"https://icboms.com/api/mcp/products/DRV8300UDIPWR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV8300UDIPWR, three-phase half-bridge gate driver, N-Channel MOSFET, 8.7V to 20V supply, 125 V bootstrap, 1.5 A peak sink, 24 ns rise, 20-TSSOP, -40°C to 125°C.","salesMarkdown":"## Three-phase half-bridge driver for 12 V to 100 V motor rails The Texas Instruments DRV8300UDIPWR is a three-phase half-bridge gate driver designed for N-channel MOSFETs in motor-drive and power-conversion stages. It drives two independent half-bridge channels with a peak source current of 750 mA and a peak sink current of 1.5 A, enough to charge and discharge the gate capacitance of medium-power MOSFETs in the 20 A to 40 A output range. The bootstrap high-side voltage is rated to 125 V, so the part handles 48 V and 72 V DC bus rails with margin, and the 8.7 V to 20 V supply range covers standard 12 V and 24 V industrial supplies. Typical rise and fall times are 24 ns and 12 ns respectively, which keeps cross-conduction losses manageable when the dead time is set correctly. ## 1.5 A peak sink — sizing the gate drive for your MOSFET The 1.5 A peak sink current is the number to check against your MOSFET's total gate charge. A MOSFET with a 50 nC Qg at the chosen drive voltage will switch in roughly 33 ns with this driver, assuming a 1 Ω gate resistor and minimal PCB inductance. The 750 mA source peak is lower, so the turn-on edge is softer than turn-off — a natural asymmetry that helps control di/dt during turn-on without adding an external Schottky in parallel with the gate resistor. No level-shifting is needed when the MCU supply matches the driver's logic supply. ## Package, footprint, and sourcing posture The mounting is surface-mount, and the supplier device package is 20-TSSOP.","metaTitle":"DRV8300UDIPWR 100-V half-bridge gate driver, 1.5 A sink","metaDescription":"Texas Instruments DRV8300UDIPWR 100-V three-phase gate driver. 1.5 A peak sink current, 24 ns rise time, 20-TSSOP. Active lifecycle, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Gate Type":"N-Channel MOSFET","Input Type":"Non-Inverting","Channel Type":"Independent","Mounting Type":"Surface Mount","Package / Case":"20-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"8.7V ~ 20V","Number of Drivers":"2","Driven Configuration":"Half-Bridge","Operating Temperature":"-40°C ~ 125°C (TA)","Rise / Fall Time (Typ)":"24ns, 12ns","Supplier Device Package":"20-TSSOP","Logic Voltage - VIL, VIH":"0.8V, 2V","High Side Voltage - Max (Bootstrap)":"125 V","Current - Peak Output (Source, Sink)":"750mA, 1.5A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.75","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.75000","currency":"USD"},{"qty":10,"price":"$1.57300","currency":"USD"},{"qty":25,"price":"$1.48400","currency":"USD"},{"qty":100,"price":"$1.26440","currency":"USD"},{"qty":250,"price":"$1.18720","currency":"USD"},{"qty":500,"price":"$1.03880","currency":"USD"},{"qty":1000,"price":"$0.86072","currency":"USD"},{"qty":3000,"price":"$0.84000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a1c4fb55197e400dda55c360d98757ae.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can DRV8300UDIPWR be used for BLDC motors?","answer":"Yes. The three-phase half-bridge configuration is designed for driving the six-MOSFET inverter stage of a BLDC motor. The 1.5 A peak sink current and 24 ns rise time support commutation frequencies into the tens of kHz with medium-power MOSFETs."},{"question":"What is the equivalent or replacement for DRV8300UDIPWR?","answer":"A functional cross-shop candidate is the LM5106MM/NOPB, also a half-bridge N-channel MOSFET driver in a similar package. The LM5106 uses synchronous channel type versus the DRV8300's independent channels, and its peak output is 1.2 A versus 1.5 A sink. Verify pin compatibility and dead-time requirements before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV8300UDIPWR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV8300UDIPWR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}