{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV5053VAQLPGM","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV5053VAQLPGM","canonicalUrl":"https://icboms.com/texas-instruments/DRV5053VAQLPGM","factsUrl":"https://icboms.com/api/mcp/products/DRV5053VAQLPGM","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV5053VAQLPGM, single-axis Hall-effect sensor, analog voltage output, ±9 mT sensing range, 20 kHz bandwidth, 2.5V–38V supply, AEC-Q100 automotive grade, TO-92-3 package.","salesMarkdown":"## What the wide supply range and ±9 mT range mean for your BOM The DRV5053VAQLPGM is a single-axis linear Hall-effect sensor from Texas Instruments that outputs an analog voltage proportional to the magnetic flux density. Its supply range of 2.5 V to 38 V lets it run directly off a 12 V or 24 V automotive rail, a 5 V logic supply, or a 3.3 V MCU rail — no dedicated regulator needed, which simplifies the power tree and saves a BOM line. The ±9 mT sensing range sets the magnetic budget for the air gap and magnet selection. At a 20 kHz bandwidth, the sensor can track motor-commutation edges and vibration signatures up to the audible range, making it suitable for position feedback in brushless DC motors and linear actuator stroke sensing. ## Output drive and supply current — what the numbers actually limit Maximum output current is 2.3 mA. This is enough to drive the analog input of a typical MCU ADC (input impedance >10 kΩ) or an op-amp buffer, but it will not directly drive a relay coil or a heavy capacitive load. The maximum supply current is 3.6 mA — the total current draw from the 2.5 V to 38 V rail, which is low enough to keep the thermal budget negligible in a sealed enclosure. Temperature compensation is built in — the output voltage drift over temperature is trimmed internally, so the system does not need a separate temperature sensor or software calibration for the magnetic path. This reduces firmware complexity and calibration time during production. Texas Instruments continues to manufacture this part in the TO-92-3 package. The base product number is DRV5053, which covers multiple sensitivity and package variants — the VAQ variant is the ±9 mT, analog-output, through-hole version. ROHS3 compliant — no exemption issues for EU or California market shipments. The part is available in Cut Tape (CT) and Tape & Box (TB) packaging, which covers both prototyping and production reel quantities.","metaTitle":"DRV5053VAQLPGM Hall Effect Sensor","metaDescription":"Texas Instruments DRV5053VAQLPGM: single-axis Hall-effect sensor, ±9 mT range, 20 kHz bandwidth, 2.5-38 V supply, -40 to 125°C, AEC-Q100. Active production.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Sensors & Transducers"],"specifications":{"Mfr":"Texas Instruments","Axis":"Single","Series":"Automotive, AEC-Q100","Package":"Cut Tape (CT); Tape & Box (TB)","Features":"Temperature Compensated","Bandwidth":"20kHz","Resolution":"-","Technology":"Hall Effect","Output Type":"Analog Voltage","Mounting Type":"Through Hole","Sensing Range":"±9mT","Package / Case":"TO-226-3, TO-92-3 Short Body","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"2.5V ~ 38V","Base Product Number":"DRV5053","Operating Temperature":"-40°C~125°C(TA)","Current - Output (Max)":"2.3mA","Current - Supply (Max)":"3.6mA","Supplier Device Package":"TO-92-3"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.5000","priceTiers":[{"qty":1,"price":"$1.50000","currency":"USD"},{"qty":5,"price":"$1.44400","currency":"USD"},{"qty":10,"price":"$1.17300","currency":"USD"},{"qty":25,"price":"$1.01080","currency":"USD"},{"qty":50,"price":"$0.87540","currency":"USD"},{"qty":100,"price":"$0.79420","currency":"USD"},{"qty":500,"price":"$0.66784","currency":"USD"},{"qty":1000,"price":"$0.59565","currency":"USD"},{"qty":3000,"price":"$0.57760","currency":"USD"},{"qty":6000,"price":"$0.54150","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/ce5215b0f3c0c344f37b2416596008a3.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/DRV5053VAQLPGM/alternatives.json"},"ai":{"faq":[{"question":"Is DRV5053VAQLPGM a direct replacement for other DRV5053 variants?","answer":"The DRV5053 family shares the same package and pinout across sensitivity variants. The VAQ suffix specifies the ±9 mT range and analog output. A different sensitivity variant (e.g., ±21 mT or ±85 mT) will have a different output voltage per gauss but the same TO-92-3 footprint and supply range. Always confirm the sensitivity grade against the magnetic circuit design before substituting."},{"question":"Is DRV5053VAQLPGM RoHS compliant?","answer":"Yes, it is ROHS3 compliant, with no restricted substances above the exemption thresholds."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV5053VAQLPGM","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV5053VAQLPGM when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}