{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV5053EAQLPGM","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV5053EAQLPGM","canonicalUrl":"https://icboms.com/texas-instruments/DRV5053EAQLPGM","factsUrl":"https://icboms.com/api/mcp/products/DRV5053EAQLPGM","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV5053EAQLPGM, Automotive AEC-Q100 series, single-axis Hall-effect sensor with analog voltage output, ±18 mT sensing range, 20 kHz bandwidth, -40°C to 125°C, TO-92-3 through-hole package.","salesMarkdown":"The DRV5053EAQLPGM is a single-axis, analog-output Hall-effect sensor from Texas Instruments, AEC-Q100 qualified for automotive environments. It outputs a voltage proportional to the magnetic flux density perpendicular to the package face, with a ±18 mT sensing range. The 20 kHz bandwidth supports fast-switching motor phases and vibration monitoring; the analog output connects directly to a 3.3V or 5V ADC without level shifting, because the supply rail (2.7V to 38V) can match the microcontroller's reference. ## Supply voltage range and output drive The 2.7V to 38V supply lets you run the sensor off a 5V or 12V automotive bus without an extra regulator. The 2.3 mA maximum output current is enough to drive a single ADC input or a low-impedance buffer; do not plan to source a relay or LED directly from the output pin. Supply current maxes at 3.6 mA, so the total sensor load on the rail stays under 4 mA — a detail that matters when budgeting the 5V standby current for a body-control module. The TO-92-3 through-hole package is a three-lead, 2.54 mm pitch footprint — hand-solderable and board-inspectable without X-ray. The short-body variant (TO-92-3 Short Body) saves 1.5 mm of height over the long-lead version, which matters when the sensor sits on a daughter card inside a sealed housing. The base product number DRV5053 covers multiple sensitivity variants in the same TO-92-3 footprint, so if the ±18 mT range is too narrow or too wide, a sibling code drops in without a board spin. ROHS3 compliant. No stock-holding claim; each lot date-code traced back to the authorized TI channel before shipment.","metaTitle":"DRV5053EAQLPGM Hall Effect Sensor – TI AEC-Q100, TO-92-3","metaDescription":"Texas Instruments DRV5053EAQLPGM single-axis analog Hall sensor, ±18 mT range, 20 kHz bandwidth, -40°C to 125°C, TO-92-3. Active production, AEC-Q100.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Sensors & Transducers"],"specifications":{"Mfr":"Texas Instruments","Axis":"Single","Series":"Automotive, AEC-Q100","Package":"Cut Tape (CT); Tape & Box (TB)","Features":"Temperature Compensated","Bandwidth":"20kHz","Resolution":"-","Technology":"Hall Effect","Output Type":"Analog Voltage","Mounting Type":"Through Hole","Sensing Range":"±18mT","Package / Case":"TO-226-3, TO-92-3 Short Body","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"2.7V ~ 38V","Base Product Number":"DRV5053","Operating Temperature":"-40°C~125°C(TA)","Current - Output (Max)":"2.3mA","Current - Supply (Max)":"3.6mA","Supplier Device Package":"TO-92-3"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.5000","priceTiers":[{"qty":1,"price":"$1.50000","currency":"USD"},{"qty":5,"price":"$1.44400","currency":"USD"},{"qty":10,"price":"$1.17300","currency":"USD"},{"qty":25,"price":"$1.01080","currency":"USD"},{"qty":50,"price":"$0.87540","currency":"USD"},{"qty":100,"price":"$0.79420","currency":"USD"},{"qty":500,"price":"$0.66784","currency":"USD"},{"qty":1000,"price":"$0.59565","currency":"USD"},{"qty":3000,"price":"$0.57760","currency":"USD"},{"qty":6000,"price":"$0.54150","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/ce5215b0f3c0c344f37b2416596008a3.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/DRV5053EAQLPGM/alternatives.json"},"ai":{"faq":[{"question":"Does DRV5053EAQLPGM work with a 3.3V microcontroller ADC?","answer":"Yes. The supply range of 2.7V to 38V includes 3.3V. The analog output swings ratiometrically with the supply — if you run the sensor from the same 3.3V rail as the MCU, the output full-scale maps directly to the ADC reference. No level shifter needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV5053EAQLPGM","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV5053EAQLPGM when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}