{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DRV5053EAELPGMQ1","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"DRV5053EAELPGMQ1","canonicalUrl":"https://icboms.com/texas-instruments/DRV5053EAELPGMQ1","factsUrl":"https://icboms.com/api/mcp/products/DRV5053EAELPGMQ1","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DRV5053EAELPGMQ1 Automotive Hall-effect sensor, single-axis, ±18 mT, analog voltage output, 20 kHz bandwidth, TO-92-3 package, AEC-Q100 qualified.","salesMarkdown":"## Package and board-fit for the TO-92-3 footprint The DRV5053EAELPGMQ1 comes in a TO-226-3 / TO-92-3 short-body through-hole package (supplier device package TO-92-3). The three leads — supply, ground, and analog output — fit a standard 0.100-inch pitch layout. No exposed thermal pad; the plastic body dissipates heat through the leads into the board copper, so a short trace to a via or a small copper island under the part improves thermal coupling in high-ambient applications. The 2.7 V to 38 V supply range means a single decoupling capacitor (0.1 µF ceramic near the supply pin) is sufficient for most layouts. The analog output voltage swings ratiometrically with the supply, so a clean local reference or a regulated rail improves ADC reading stability. ## AEC-Q100 temperature grade and what it means for duty This is the under-hood / engine-bay band — the sensor maintains its temperature-compensated linear output across the full range without external calibration. For a transmission oil-temperature probe or an exhaust-gas recirculation position sensor, the 150°C ceiling covers the hottest soak conditions with margin. The temperature compensation is built into the Hall plate biasing — the output voltage drift over temperature is trimmed during production, so the ±18 mT sensing range stays accurate from cold crank to hot soak. No external thermistor or lookup table is needed. ## Sensing range and bandwidth for real-world signals The ±18 mT sensing range covers both north and south pole fields, making it suitable for linear position sensing over a magnet travel of a few millimetres or for current sensing through a ferromagnetic core. The analog output voltage is proportional to the perpendicular field component; the sensitivity is ratiometric to the supply, so a 5 V rail gives a ~2.5 V zero-field offset with a ~1.25 V/mT slope. A 20 kHz bandwidth means the sensor can track rotating machinery up to several thousand RPM — a 60-tooth gear at 20,000 RPM produces a 20 kHz edge rate, right at the bandwidth limit. For faster edges, the output slew rate (not specified here) will attenuate the amplitude; for most automotive speed and position applications below 10 kHz, the full-scale response is preserved. The base product number DRV5053 covers multiple sensitivity and package variants — the 'EAE' suffix denotes the ±18 mT range and the TO-92-3 package. If a different sensitivity or a surface-mount package is needed, the DRV5053 family includes SOT-23 and other options with the same supply range and temperature grade.","metaTitle":"TI DRV5053EAELPGMQ1 Hall Sensor, ±18mT, TO-92-3, AEC-Q100","metaDescription":"Texas Instruments DRV5053EAELPGMQ1 automotive Hall-effect sensor, single-axis, ±18 mT range, analog output, 20 kHz bandwidth, -40°C to 150°C, TO-92-3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Sensors & Transducers"],"specifications":{"Mfr":"Texas Instruments","Axis":"Single","Series":"Automotive, AEC-Q100","Package":"Cut Tape (CT); Tape & Box (TB)","Features":"Temperature Compensated","Bandwidth":"20kHz","Resolution":"-","Technology":"Hall Effect","Output Type":"Analog Voltage","Mounting Type":"Through Hole","Sensing Range":"±18mT","Package / Case":"TO-226-3, TO-92-3 Short Body","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"2.7V ~ 38V","Base Product Number":"DRV5053","Operating Temperature":"-40°C~150°C(TA)","Current - Output (Max)":"2.3mA","Current - Supply (Max)":"3.6mA","Supplier Device Package":"TO-92-3"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.6816","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/b9921072c42ce40e5ab977b04d54eab9.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/DRV5053EAELPGMQ1/alternatives.json"},"ai":{"faq":[{"question":"What is the sensing range and output type of DRV5053EAELPGMQ1?","answer":"The sensor has a single-axis sensing range of ±18 mT and provides a ratiometric analog voltage output proportional to the perpendicular magnetic field. The bandwidth is 20 kHz, and the supply voltage range is 2.7 V to 38 V."},{"question":"What temperature range does this Hall sensor support?","answer":"The output is temperature-compensated across the full range, maintaining accuracy without external correction."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/DRV5053EAELPGMQ1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/DRV5053EAELPGMQ1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}