{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DG413EUE+","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"DG413EUE","canonicalUrl":"https://icboms.com/analog-devices/DG413EUE","factsUrl":"https://icboms.com/api/mcp/products/DG413EUE%2B","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices DG413EUE+ quad SPST analog switch, 45 Ohm on-resistance, 175ns/145ns switching, -85dB crosstalk, 16-TSSOP, tube packaging.","salesMarkdown":"The DG413EUE+: ROHS3 compliant, so it ships without lead, mercury, cadmium, or other restricted substances per EU Directive 2011/65/EU. No special handling or exemption paperwork needed for global shipments. ## 45 Ohm on-resistance and switching speed — signal path limits For a 10 mA signal, the drop is 450 mV; for precision analog paths, the load impedance should be at least 10x higher than Ron to keep attenuation below 1%. The 3 Ohm max channel-to-channel matching means all four switches track within that band — useful for gain-matched multiplexer stages. Switching times are 175 ns max turn-on, 145 ns max turn-off. This 320 ns total cycle sets the maximum multiplexing rate at roughly 3 MHz before the output settles to within spec. For audio-frequency switching (up to 20 kHz) the margin is generous; for video or high-speed data paths, the timing budget needs a closer look. ## Crosstalk and charge injection — analog signal integrity Crosstalk is -85 dB at 1 MHz — the isolation between channels at that frequency. For a 1 Vpp signal on one channel, the coupled signal on an adjacent channel is about 56 µVpp. This is adequate for 12-bit systems; for 16-bit or higher, the noise floor from crosstalk may limit the usable dynamic range at higher frequencies. Charge injection is 5 pC — the amount of charge dumped onto the load when the switch turns off. For a sample-and-hold capacitor of 10 nF, this creates a 0.5 mV step. In precision acquisition circuits, the injection error adds to the hold-step and must be budgeted into the system offset. ## Supply rails and temperature — operating envelope The wide range lets the part work in systems with 12 V, 15 V, or 24 V rails without an extra regulator. With ±15 V supplies, the switch handles analog signals up to ±15 V peak. This covers most factory-floor, instrumentation, and telecom environments. The leakage current (250 pA max off-state,) and channel capacitance (9 pF each side,) are specified across this range — expect leakage to increase near the upper temperature limit, but the 250 pA ceiling keeps it manageable for high-impedance circuits. ## 16-TSSOP package — board integration The 16-TSSOP package has a 0.65 mm pitch and 4.4 mm body width — a compact footprint that fits on two-layer boards with careful fan-out. The body is thin (1.2 mm max seated height), suitable for mezzanine or card-edge applications where height is constrained. For prototype builds or low-volume production this is fine; for high-volume pick-and-place, request the tape-and-reel variant (DG413EUE+T) to avoid tube-feeding issues.","metaTitle":"Analog Devices DG413EUE+ Quad SPST Switch, 45 Ohm, 16-TSSOP","metaDescription":"DG413EUE+ quad SPST analog switch from Analog Devices, 45 Ohm on-resistance, 175ns switching, -85dB crosstalk, 16-TSSOP. Active production, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tube","Crosstalk":"-85dB @ 1MHz","Mounting Type":"Surface Mount","Package / Case":"16-TSSOP (0.173\\\", 4.40mm Width)","Switch Circuit":"SPST - NO/NC","lifecycle_stage":"eol_hot","Charge Injection":"5pC","Number of Circuits":"4","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"16-TSSOP","On-State Resistance (Max)":"45Ohm","Voltage - Supply, Dual (V±)":"±4.5V ~ 20V","Switch Time (Ton, Toff) (Max)":"175ns, 145ns","Voltage - Supply, Single (V+)":"10V ~ 30V","Current - Leakage (IS(off)) (Max)":"250pA","Multiplexer/Demultiplexer Circuit":"1:1","Channel Capacitance (CS(off), CD(off))":"9pF, 9pF","Channel-to-Channel Matching (ΔRon)":"3Ohm (Max)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.66","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$6.66000","currency":"USD"},{"qty":10,"price":"$5.98500","currency":"USD"},{"qty":25,"price":"$5.65840","currency":"USD"},{"qty":100,"price":"$4.90410","currency":"USD"},{"qty":250,"price":"$4.65256","currency":"USD"},{"qty":500,"price":"$4.17474","currency":"USD"},{"qty":1000,"price":"$3.52086","currency":"USD"},{"qty":2500,"price":"$3.34482","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/734166fa517f77da12b1f607002c6dce.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the crosstalk specification for DG413EUE+?","answer":"Crosstalk is -85 dB at 1 MHz. This is the isolation between any two channels at that frequency — a 1 V signal on one channel couples about 56 µV into an adjacent channel."},{"question":"What package does DG413EUE+ come in?","answer":"The DG413EUE+ is supplied in a 16-lead TSSOP package — 0.65 mm pitch, 4.4 mm body width. It ships in tubes, not tape-and-reel."},{"question":"What is the on-resistance and switching speed of DG413EUE+?","answer":"Maximum on-resistance is 45 Ohm with 3 Ohm max channel-to-channel matching. Turn-on time is 175 ns max, turn-off is 145 ns max."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/DG413EUE","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/DG413EUE when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}