{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"DFEG7030D-1R0M=P3","brand":"Murata Electronics","brandSlug":"murata-electronics","productSlug":"DFEG7030D-1R0MP3","canonicalUrl":"https://icboms.com/murata-electronics/DFEG7030D-1R0MP3","factsUrl":"https://icboms.com/api/mcp/products/DFEG7030D-1R0M%3DP3","rawCanonicalId":null},"summary":{"shortDescription":"Murata Electronics DFEG7030D series, Shielded Power Inductor, 1 µH, ±20%, 9.1 A, 9.9mOhm DCR, Surface Mount, Nonstandard, AEC-Q200.","salesMarkdown":"## 1 µH shielded power inductor with AEC-Q200 pedigree The Murata DFEG7030D-1R0M=P3 is a 1 µH shielded power inductor from the DFEG7030D series, built around an iron powder core and wound for a 9.1 A continuous current rating with a DCR of 9.9 mOhm max. Saturation current is rated at 12 A, so the inductance holds flat through the full 9.1 A operating range before the core begins to roll off. ## NRND lifecycle — what it means for procurement No official successor order code is listed by Murata; a parametric search within the DFEG7030D family for the same 7.0 mm x 6.6 mm footprint and 3.0 mm seated height may yield a functionally equivalent active replacement, but pin-compatibility and electrical fit must be verified against the original design's saturation and DCR targets. ## Board-fit and thermal envelope The part occupies a 7.00 mm x 6.60 mm nonstandard footprint and stands 3.00 mm off the board — a low-profile shielded inductor suited for dense power stages where height clearance is tight. The iron powder core material handles DC bias without the saturation snap of ferrite, making this a good fit for high-ripple current paths like buck converter outputs or input filters where the inductor sees a significant DC offset. Shielded construction contains the magnetic flux, reducing radiated EMI into adjacent traces or sensitive analog sections — a practical advantage when the inductor sits near a CAN transceiver or sensor front-end on the same board.","metaTitle":"Murata DFEG7030D-1R0M=P3 Shielded Power Inductor, 1 µH","metaDescription":"Murata DFEG7030D-1R0M=P3, 1 µH shielded power inductor, 9.1 A rated, 12 A Isat, AEC-Q200, NRND. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"NRND","categoryPath":["Inductors & Chokes"],"specifications":{"Mfr":"Murata Electronics","Type":"-","Series":"DFEG7030D","Package":"Tape & Reel (TR); Cut Tape (CT)","Ratings":"AEC-Q200","Features":"-","Q @ Freq":"-","Shielding":"Shielded","Tolerance":"±20%","Inductance":"1 µH","Mounting Type":"Surface Mount","Package / Case":"Nonstandard","Product Status":"Not For New Designs","Material - Core":"Iron Powder","lifecycle_stage":"unknown","Size / Dimension":"0.276\\\" L x 0.260\\\" W (7.00mm x 6.60mm)","Base Product Number":"DFEG7030D","DC Resistance (DCR)":"9.9mOhm Max","Current Rating (Amps)":"9.1 A","Height - Seated (Max)":"0.118\\\" (3.00mm)","Operating Temperature":"-40°C~125°C","Supplier Device Package":"-","Frequency - Self Resonant":"-","Current - Saturation (Isat)":"12A","Inductance Frequency - Test":"100 kHz"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.5900","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/d2605d9f7c994a006e171b5458ba72d5.pdf","sourceUrl":null},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/murata-electronics/DFEG7030D-1R0MP3","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/murata-electronics/DFEG7030D-1R0MP3 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-20T14:34:45.345Z","lastPublished":"2026-07-20T14:34:45.345Z","indexable":true}}