{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CDCEL913PWRG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"CDCEL913PWRG4","canonicalUrl":"https://icboms.com/texas-instruments/CDCEL913PWRG4","factsUrl":"https://icboms.com/api/mcp/products/CDCEL913PWRG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments CDCEL913PWRG4, PLL Clock Synthesizer with Bypass, 1 Circuit, 1:3 Ratio, LVCMOS/Crystal Input, LVCMOS Output, 230 MHz Max, 1.7V-1.9V Supply, -40°C~85°C, 14-TSSOP.","salesMarkdown":"## 230 MHz PLL with a 1.8 V-only rail The CDCEL913PWRG4 is a single-circuit PLL clock synthesizer from Texas Instruments that accepts either an LVCMOS reference or a fundamental-mode crystal and delivers up to three LVCMOS clock outputs, each running to 230 MHz. The part includes a PLL bypass mode, which lets you feed the reference straight through to the outputs for system test or low-jitter paths where the PLL would add phase noise. ## Supply rail and temperature — the BOM gate If your board already carries a 1.8 V rail (common for DDR memory or low-power FPGAs), this PLL drops in without an extra regulator. If not, budget for a small LDO. ## Three outputs, no differential The 1:3 input-to-output ratio gives three LVCMOS outputs from one reference — enough to clock a small FPGA bank, a couple of SERDES transceivers, and a PHY, all from a single PLL. The outputs are single-ended only; there is no differential (LVPECL, LVDS, HCSL) output option, so this part is not suited for high-speed serial links that need a differential reference. For a new design, this part is a low-risk choice from a lifecycle standpoint — you are not betting on a sunsetting line.","metaTitle":"CDCEL913PWRG4 PLL Clock Synthesizer, 230 MHz, 14-TSSOP","metaDescription":"TI CDCEL913PWRG4 PLL clock synthesizer with bypass, 230 MHz max, 1.7-1.9 V supply, LVCMOS/crystal input, 14-TSSOP. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Clock & Timing ICs"],"specifications":{"Mfr":"Texas Instruments","PLL":"Yes with Bypass","Type":"PLL Clock Synthesizer","Input":"LVCMOS, Crystal","Output":"LVCMOS","Series":"-","Package":"Tape & Reel (TR)","Mounting Type":"Surface Mount","Package / Case":"14-TSSOP (0.173\\\", 4.40mm Width)","Frequency - Max":"230MHz","lifecycle_stage":"eol_hot","Voltage - Supply":"1.7V ~ 1.9V","Divider/Multiplier":"Yes/Yes","Number of Circuits":"1","Base Product Number":"CDCEL913","Ratio - Input:Output":"1:3","Operating Temperature":"-40°C~85°C","Supplier Device Package":"14-TSSOP","Differential - Input:Output":"No/No"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$178.8000","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/fbaf9abc24e11227d5735c6c8d1a5fb8.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can CDCEL913PWRG4 accept a crystal input?","answer":"Yes, the input accepts either an LVCMOS clock or a fundamental-mode crystal. Using a crystal saves the cost and board space of a separate oscillator."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/CDCEL913PWRG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/CDCEL913PWRG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}