{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CD74HC4067M96","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"CD74HC4067M96","canonicalUrl":"https://icboms.com/texas-instruments/CD74HC4067M96","factsUrl":"https://icboms.com/api/mcp/products/CD74HC4067M96","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments CD74HC4067M96, 16:1 analog multiplexer/demultiplexer, 160-ohm max on-resistance, 89 MHz bandwidth, 2 V to 6 V supply, -55 to 125 °C, 24-SOIC package.","salesMarkdown":"The CD74HC4067M96 is a single 16:1 analog multiplexer/demultiplexer from TI's 74HC family. It replaces sixteen individual SPST switches or a handful of smaller muxes with one IC, which is the kind of board-space win that makes a field kit lighter and a BOM shorter. Rated for the full -55 to 125 °C temperature range, this part is at home in an engine bay, a satellite transceiver, or a downhole tool — not just a climate-controlled lab bench. ## 160-ohm on-resistance — the voltage-drop budget Maximum on-resistance is 160 ohms across the full supply and temperature range. Use that for worst-case voltage drop calculation. Channel-to-channel matching is 8.5 ohms max, so the gain error across channels stays tight — useful when you are scanning multiple sensors and do not want a different offset on each channel. Off-leakage current is 800 nA max. That is low enough to not load your signal source, but if you are multiplexing high-impedance outputs (mega-ohm range), the leakage will develop an offset voltage you need to budget for. ## 89 MHz bandwidth — analog and digital signals The -3 dB bandwidth is 89 MHz, which means this mux passes composite video, 10-100 MHz clock signals, and fast analog waveforms without rolling off the edges. For a digital bus or an analog sensor front-end, that bandwidth is more than adequate. Switching times are 51 ns on and 49 ns off, so you can scan all 16 channels at several megahertz without missing a sample. The channel capacitance (5 pF off, 50 pF off on the drain side) will limit your settling time at the ADC input — factor that into your acquisition window.","metaTitle":"CD74HC4067M96 16:1 Analog Mux/Demux, 160 Ohm Ron","metaDescription":"CD74HC4067M96 is a 16-channel analog multiplexer/demultiplexer in a 24-SOIC package. 160-ohm max on-resistance, 89 MHz bandwidth, -55 to 125 °C range.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Crosstalk":"-","Mounting Type":"Surface Mount","-3db Bandwidth":"89MHz","Package / Case":"24-SOIC (0.295\\\", 7.50mm Width)","Product Status":"Active","Switch Circuit":"-","lifecycle_stage":"eol_hot","Charge Injection":"-","Number of Circuits":"1","Base Product Number":"74HC4067","Operating Temperature":"-55°C~125°C(TA)","Supplier Device Package":"24-SOIC","On-State Resistance (Max)":"160Ohm","Voltage - Supply, Dual (V±)":"-","Switch Time (Ton, Toff) (Max)":"51ns, 49ns","Voltage - Supply, Single (V+)":"2V ~ 6V","Current - Leakage (IS(off)) (Max)":"800nA","Multiplexer/Demultiplexer Circuit":"16:1","Channel Capacitance (CS(off), CD(off))":"5pF, 50pF","Channel-to-Channel Matching (ΔRon)":"8.5Ohm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.9200","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/7115073c8a652aeba25e3bb2370b348d.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/CD74HC4067M96/alternatives.json"},"ai":{"faq":[{"question":"Does CD74HC4067M96 work with 3.3 V logic?","answer":"Yes. The supply range is 2 V to 6 V, so it runs on a 3.3 V rail directly. The logic inputs are CMOS-compatible and will recognise 3.3 V as a valid high level."},{"question":"What is the typical on-resistance of CD74HC4067M96?","answer":"The datasheet specifies a maximum on-resistance of 160 ohms across the full operating range. Typical values are lower at 25 °C and 5 V supply, but use the 160-ohm max for your worst-case design margin."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/CD74HC4067M96","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/CD74HC4067M96 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}