{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BYW98-200","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"BYW98-200","canonicalUrl":"https://icboms.com/stmicroelectronics/BYW98-200","factsUrl":"https://icboms.com/api/mcp/products/BYW98-200","rawCanonicalId":null},"summary":{"shortDescription":"BYW98-200, Standard Fast Recovery Rectifier, 35 ns trr, 3 A, 200 V, DO-201AD Axial, Through Hole.","salesMarkdown":"## 35 ns reverse recovery — what it buys you The BYW98-200 is a standard fast recovery rectifier with a reverse recovery time of 35 ns — that is the interval from zero current to full blocking when the diode commutates. In a 50 kHz or 100 kHz flyback secondary, that 35 ns trr keeps the reverse-recovery current spike short enough that the snubber and the MOSFET do not see an extra dissipation cycle. The 35 ns figure is the maximum over temperature, so the design margin stays intact across the junction range up to 150°C. ## 3 A average, 200 V — the continuous rating envelope Rated for 3 A average rectified current and 200 V reverse voltage. The forward voltage drop is 1.2 V maximum at 9 A pulsed — that is the surge condition, not the continuous operating point. At 3 A the Vf will be lower, but the absolute-max table is the design boundary; stay inside it. The 10 µA reverse leakage at 200 V is a room-temperature figure; expect leakage to rise with junction temperature, so the thermal design should keep the junction below the 150°C maximum. ## DO-201AD axial — legacy through-hole footprint The DO-201AD axial-lead package is a through-hole form factor that has been in production for decades. It is a direct drop-in for any board originally laid out for a DO-201AD rectifier. The axial leads are crimped and soldered into plated-through holes; the body length and diameter match the standard DO-201AD cavity. If the BOM calls for a surface-mount alternative, a DO-214AB (SMC) or SMA package would require a different footprint and thermal pad design. ## Obsolete — sourcing reality The BYW98-200 carries an Obsolete product status. For a production run, the buyer should evaluate a pin-compatible fast-recovery rectifier in the same DO-201AD package with matching 200 V / 3 A / 35 ns ratings.","metaTitle":"BYW98-200 Fast Recovery Rectifier, 35 ns trr, 3 A, 200 V","metaDescription":"BYW98-200 standard fast recovery rectifier: 35 ns trr, 3 A average, 200 V reverse, DO-201AD axial.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"STMicroelectronics","Speed":"Fast Recovery =< 500ns, > 200mA (Io)","Series":"-","Package":"Cut Tape (CT); Tape & Box (TB)","Diode Type":"Standard","Mounting Type":"Through Hole","Package / Case":"DO-201AD, Axial","Product Status":"Obsolete","lifecycle_stage":"eol_hot","Base Product Number":"BYW98","Capacitance @ Vr, F":"-","Supplier Device Package":"DO-201AD","Reverse Recovery Time (trr)":"35 ns","Current - Reverse Leakage @ Vr":"10 µA @ 200 V","Voltage - DC Reverse (Vr) (Max)":"200 V","Current - Average Rectified (Io)":"3A","Operating Temperature - Junction":"150°C(Max)","Voltage - Forward (Vf) (Max) @ If":"1.2 V @ 9 A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.6800","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/97ab308eddcee91bcd5786beb2f626cd.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is BYW98-200 obsolete?","answer":"Yes, the BYW98-200 is listed as Obsolete. It is no longer manufactured by the original supplier. It can be sourced through independent distribution on an RFQ basis."},{"question":"What is the reverse recovery time of BYW98-200?","answer":"The reverse recovery time (trr) is 35 ns. This is the maximum spec across the operating junction temperature range up to 150°C."},{"question":"What is the equivalent or replacement for BYW98-200?","answer":"No official equivalent or successor is listed by the manufacturer. A functional replacement would be a standard fast recovery rectifier in DO-201AD package rated at 200 V, 3 A, with a trr of 35 ns or faster. Confirm the forward voltage drop and surge current rating against the BOM requirements before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/BYW98-200","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/BYW98-200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-16T16:24:48.065Z","lastPublished":"2026-07-16T16:24:48.065Z","indexable":true}}