{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BU7264F-E2","brand":"ROHM Semiconductor","brandSlug":"rohm","productSlug":"BU7264F-E2","canonicalUrl":"https://icboms.com/rohm/BU7264F-E2","factsUrl":"https://icboms.com/api/mcp/products/BU7264F-E2","rawCanonicalId":null},"summary":{"shortDescription":"ROHM Semiconductor BU7264F- quad CMOS operational amplifier, 14-SOP package, 2 MHz gain bandwidth, 1.1 V/µs slew rate, rail-to-rail output, 1.8 V to 5.5 V supply.","salesMarkdown":"## Active quad CMOS op-amp — parametric fit for battery-powered signal chains The BU7264F-E2: The BU7264F- is a quad CMOS operational amplifier in a 14-SOP body, combining rail-to-rail output swing with a 2 MHz gain-bandwidth product and 1.1 V/µs slew rate. The CMOS input stage delivers 1 pA typical input bias current and 1 mV input offset — adequate for conditioning high-impedance sensors (photodiodes, piezo films) where FET-input amplifiers are the norm. ## Bandwidth and output drive — what the numbers mean for a BOM decision At 2 MHz GBW, the amplifier's closed-loop bandwidth at a gain of 10 is roughly 200 kHz — sufficient for audio-frequency anti-aliasing or sensor filtering before a low-speed ADC. The 1.1 V/µs slew rate limits full-scale step response: a 2 V output step settles in about 1.8 µs, which sets the minimum sampling interval if the op-amp drives the ADC input directly. Each channel can source or sink 12 mA — enough to drive a reference input or a 2 kΩ load to within 100 mV of the rails, but not intended for heavy cable or headphone loads. Total supply current for all four amplifiers is 1.1 mA typical, keeping the quiescent draw low in multi-channel battery-powered data-acquisition boards. Housed in a 14-SOIC (4.40 mm body width, 0.173\" pitch) with a 14-SOP supplier package designation — a standard footprint that reflows on a conventional lead-free profile without special stencil requirements. ROHS3 compliant per the manufacturer's lifecycle record — no exemption conflicts for EU or UKCA markets.","metaTitle":"ROHM BU7264F-E2 CMOS Op-Amp, 4 Circuit, 2 MHz, Rail-to-Rail","metaDescription":"ROHM BU7264F-E2 quad CMOS op-amp, 2 MHz GBW, 1.1 V/µs slew rate, rail-to-rail output, 1.8-5.5 V supply. Active production, ROHS3. Order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"1.1V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"14-SOIC (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.1mA","Number of Circuits":"4","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"2 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"14-SOP","Current - Output / Channel":"12 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.14","stockQuantity":26,"priceTiers":[{"qty":1,"price":"$1.14000","currency":"USD"},{"qty":10,"price":"$1.01600","currency":"USD"},{"qty":25,"price":"$0.96440","currency":"USD"},{"qty":100,"price":"$0.79210","currency":"USD"},{"qty":250,"price":"$0.74048","currency":"USD"},{"qty":500,"price":"$0.65438","currency":"USD"},{"qty":1000,"price":"$0.51662","currency":"USD"},{"qty":2500,"price":"$0.48218","currency":"USD"},{"qty":5000,"price":"$0.45807","currency":"USD"},{"qty":12500,"price":"$0.44084","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7144db9991d34bff95bf165303c76a46.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Where can I buy BU7264F- and get a price?","answer":"Submit an RFQ for real-time availability and pricing — no stock-holding claim is made here."},{"question":"What is the closest pin-compatible alternative to BU7264F-?","answer":"The parametric fit — quad CMOS, rail-to-rail, 2 MHz GBW, 1.8-5.5 V — is common across several vendors, but pin compatibility must be verified against the target PCB footprint."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/rohm/BU7264F-E2","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/rohm/BU7264F-E2 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}