{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BTT60502ERAXUMA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BTT60502ERAXUMA1","canonicalUrl":"https://icboms.com/infineon/BTT60502ERAXUMA1","factsUrl":"https://icboms.com/api/mcp/products/BTT60502ERAXUMA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon PROFET® BTT60502ERAXUMA1 automotive AEC-Q100 high-side power switch, 2-channel, 50 mOhm typical Rds(on), 3 A max per output, 5 V to 36 V load, 14-SOIC exposed pad, -40°C to 150°C.","salesMarkdown":"## What this PROFET® switch does and where it fits The Infineon BTT60502ERAXUMA1 is a dual-channel high-side power switch from the automotive PROFET® family, qualified to AEC-Q100. It switches resistive, capacitive, and moderate inductive loads on automotive rails. Each of the two N-channel outputs delivers up to 3 A continuous, with a typical on-resistance of 50 mOhm. The load supply range spans 5 V to 36 V, and the junction temperature rating of -40°C to 150°C covers under-hood and engine-bay environments. ## Fault protection — what is built in and what still needs external parts The BTT60502ERAXUMA1 integrates current limiting (fixed threshold), open-load detection, over-temperature shutdown, and over-voltage clamping. That covers the common failure modes for a high-side driver: a shorted load won't blow the switch, a disconnected load gets flagged, and a thermal runaway trips before damage. No external sense resistor or comparator is needed for these protections. The input is a simple on/off logic signal (non-inverting), and no Vcc supply is required — the switch is self-powered from the load voltage. ## Package and mounting — the exposed-pad requirement The part comes in a package with an exposed pad (Infineon code PG-TDSO-14-31). The pad is the main thermal path; a PCB layout with a thermal via array under the pad is expected for any load above about 1 A per channel. The package footprint is 3.90 mm wide body, 0.154\" pitch — standard SOIC-14 land pattern, but the centre pad adds a solder-paste stencil opening. Tape & Reel or Cut Tape options are available for volume or prototype quantities. ## Lifecycle and compliance — active, ROHS3, AEC-Q100 The BTT60502ERAXUMA1 is listed as Active with no end-of-life notice. It is ROHS3 compliant and carries AEC-Q100 automotive qualification. For a production BOM, this means no near-term LTB risk and full regulatory acceptance in EU and global markets.","metaTitle":"Infineon BTT60502ERAXUMA1 PROFET High-Side Switch, 50 mOhm","metaDescription":"Infineon BTT60502ERAXUMA1 automotive AEC-Q100 PROFET high-side switch: 2 channels, 50 mOhm Rds(on), 3 A max, 5-36 V load, fault protection. Active, ROHS3.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q100, PROFET®","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["DC-DC Power Modules"],"specifications":{"Series":"Automotive, AEC-Q100, PROFET®","Package":"Tape & Reel (TR); Cut Tape (CT)","Interface":"On/Off","Input Type":"Non-Inverting","Output Type":"N-Channel","Switch Type":"General Purpose","Rds On (Typ)":"50mOhm","Mounting Type":"Surface Mount","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width) Exposed Pad","Voltage - Load":"5V ~ 36V","lifecycle_stage":"eol_hot","Fault Protection":"Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage","Number of Outputs":"2","Output Configuration":"High Side","Ratio - Input:Output":"1:1","Operating Temperature":"-40°C ~ 150°C (TJ)","Current - Output (Max)":"3A","Supplier Device Package":"PG-TDSO-14-31","Voltage - Supply (Vcc/Vdd)":"Not Required"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.88","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$3.88000","currency":"USD"},{"qty":10,"price":"$3.48900","currency":"USD"},{"qty":25,"price":"$3.29840","currency":"USD"},{"qty":100,"price":"$2.85870","currency":"USD"},{"qty":250,"price":"$2.71212","currency":"USD"},{"qty":500,"price":"$2.43358","currency":"USD"},{"qty":1000,"price":"$2.05242","currency":"USD"},{"qty":3000,"price":"$1.94980","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/30cb9f98ad18a77a25ebc3aaf9a45c4c.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is BTT60502ERAXUMA1 RoHS compliant and AEC-Q100 qualified?","answer":"Yes, it is ROHS3 compliant and AEC-Q100 qualified as part of the automotive PROFET® series."},{"question":"What are the fault protection features of BTT60502ERAXUMA1?","answer":"It includes current limiting (fixed), open load detection, over-temperature shutdown, and over-voltage clamping."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BTT60502ERAXUMA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BTT60502ERAXUMA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}