{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BTS410E2 E3062A","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BTS410E2-E3062A","canonicalUrl":"https://icboms.com/infineon/BTS410E2-E3062A","factsUrl":"https://icboms.com/api/mcp/products/BTS410E2%20E3062A","rawCanonicalId":null},"summary":{"shortDescription":"Infineon PROFET BTS410E2 E3062A, single-channel high-side N-channel power switch, 190 mOhm typ Rds(on), 1.6 A max output, 4.7 V to 42 V load voltage, TO-263-5 D²Pak, -40°C to 150°C junction.","salesMarkdown":"The BTS410E2 E3062A is a single-channel high-side N-channel power switch from Infineon's PROFET family, designed for driving resistive, inductive, and lamp loads in 12 V and 24 V automotive and industrial systems. Its typical on-resistance of 190 mOhm at 25 °C sets the conduction loss: at the 1.6 A maximum continuous output, expect roughly 0.5 W dissipation in the switch alone — well within the TO-263-5 D²Pak package capability with proper board copper, but the thermal budget tightens as ambient climbs toward the 150 °C junction limit. The switch operates over a 4.7 V to 42 V load supply range, covering nominal 12 V and 24 V rails with headroom for load-dump transients. No external Vcc supply is needed — the gate drive is self-biased from the load voltage, which simplifies the BOM but means the switch cannot turn on below the undervoltage lockout threshold. ## Fault protection set — integrated, no external watchdog The BTS410E2 E3062A integrates fixed current limiting, open-load detection, overtemperature shutdown, and overvoltage clamping. The current limit is fixed — no external sense resistor or programming pin — which saves board area but means the limit profile is non-adjustable. The status flag output (open-drain, active low) reports fault conditions to the MCU, enabling software-based diagnostics without a separate ADC channel. The auto-restart feature cycles the output after an overtemperature fault once the die cools, which is useful for lamp inrush or motor-stall recovery but can mask a persistent short if the downstream controller does not latch off on the status flag. ## Obsolete — sourcing through independent distribution Infineon lists the BTS410E2 E3062A as obsolete. For new designs, evaluate current-generation PROFET devices in the same TO-263-5 footprint — the pinout and function are consistent across the family, but confirm the Rds(on) and protection feature set against your load requirements. ## Package and temperature grade The supplier device package is PG-TO263-5-2.","metaTitle":"BTS410E2 E3062A PROFET high-side switch, 190 mOhm, 1.6 A","metaDescription":"Infineon BTS410E2 E3062A PROFET high-side power switch, 190 mOhm typ Rds(on), 1.6 A output, 4.7-42 V load.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Infineon Technologies","Series":"PROFET®","Package":"Tape & Reel (TR)","Features":"Auto Restart, Status Flag","Interface":"On/Off","Input Type":"Non-Inverting","Output Type":"N-Channel","Switch Type":"General Purpose","Rds On (Typ)":"190mOhm","Mounting Type":"Surface Mount","Package / Case":"TO-263-5, D²Pak (4 Leads + Tab), TO-263BB","Product Status":"Obsolete","Voltage - Load":"4.7V ~ 42V","lifecycle_stage":"eol_hot","Fault Protection":"Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage","Number of Outputs":"1","Base Product Number":"BTS410E2","Output Configuration":"High Side","Ratio - Input:Output":"1:1","Operating Temperature":"-40°C ~ 150°C (TJ)","Current - Output (Max)":"1.6A","Supplier Device Package":"PG-TO263-5-2","Voltage - Supply (Vcc/Vdd)":"Not Required"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.1600","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/b82f6c865867b48a26b9846c63bde67f.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Where can I buy BTS410E2 E3062A?","answer":"Submit an RFQ for current availability and pricing — quotes are confirmed at order time. No stock-holding claim is made here."},{"question":"Is BTS410E2 E3062A obsolete?","answer":"Yes, Infineon lists the BTS410E2 E3062A as obsolete. For existing BOMs, source through independent channels; for new designs, evaluate current PROFET alternatives with similar Rds(on) and protection features."},{"question":"What is the Rds(on) of BTS410E2 E3062A?","answer":"The typical on-resistance is 190 mOhm at 25 °C. This sets the conduction loss at a given load current — at the 1.6 A maximum output, expect roughly 0.5 W dissipation in the switch."},{"question":"Does BTS410E2 E3062A have overcurrent protection?","answer":"Yes, it includes fixed current limiting as part of its integrated fault protection set, along with open-load detection, overtemperature shutdown, and overvoltage clamping."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BTS410E2-E3062A","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BTS410E2-E3062A when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}