{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BTA2008-600E,412","brand":"NXP Semiconductors","brandSlug":"nxp","productSlug":"BTA2008-600E412","canonicalUrl":"https://icboms.com/nxp/BTA2008-600E412","factsUrl":"https://icboms.com/api/mcp/products/BTA2008-600E%2C412","rawCanonicalId":null},"summary":{"shortDescription":"WeEn BTA2008-600E,412 logic-sensitive gate triac, 600 V off-state, 800 mA RMS on-state, 10 mA gate trigger, TO-92-3 through-hole, bulk.","salesMarkdown":"The WeEn BTA2008-600E,412 is a single logic-sensitive gate triac rated for 600 V off-state and 800 mA RMS on-state current. It comes in a TO-92-3 through-hole package with formed leads, intended for low-power AC switching in applications like small motor control, lamp dimming, and relay or solenoid drivers. The sensitive gate (10 mA maximum trigger current) lets it fire directly from a logic-level signal — no separate driver transistor needed on the board. ## 10 mA gate trigger — logic-level drive without extra parts The maximum gate trigger current of 10 mA and voltage of 2 V allow a microcontroller output to drive it through a series resistor. The 12 mA holding current ensures the triac latches on once triggered. ## TO-92-3 package — field-swappable, no hot air required The TO-92-3 through-hole package (TO-226-3 equivalent) with formed leads is socket-friendly and easy to hand-solder. On a service call, you can swap it with a screwdriver and a soldering iron — no hot-air station, no reflow profile. The bulk packaging means you get loose parts, not tape-and-reel, so pulling one for a repair is straightforward. WeEn lists this part as Active — no end-of-life notice. It is a current-production device.","metaTitle":"BTA2008-600E,412 WeEn Triac, 600 V, 800 mA","metaDescription":"WeEn BTA2008-600E,412 logic-sensitive gate triac, 600 V off-state, 800 mA RMS, TO-92-3 through-hole. Active lifecycle, available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Bulk","Triac Type":"Logic - Sensitive Gate","Configuration":"Single","Mounting Type":"Through Hole","Package / Case":"TO-226-3, TO-92-3 (TO-226AA) Formed Leads","lifecycle_stage":"eol_hot","Voltage - Off State":"600 V","Operating Temperature":"125°C (TJ)","Supplier Device Package":"TO-92-3","Current - Hold (Ih) (Max)":"12 mA","Current - Gate Trigger (Igt) (Max)":"10 mA","Voltage - Gate Trigger (Vgt) (Max)":"2 V","Current - On State (It (RMS)) (Max)":"800 mA","Current - Non Rep. Surge 50, 60Hz (Itsm)":"9A, 10A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.18","stockQuantity":0,"priceTiers":[{"qty":1697,"price":"$0.18000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7221234db823472aa6d0324d33b4ce92.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Where can I buy BTA2008-600E,412 available via RFQ confirmation?","answer":"This part is sourced and quoted to order through independent distribution. Submit an RFQ for current availability and pricing; stock levels and lead time are confirmed at quote time."},{"question":"What is the gate trigger current (Igt) for BTA2008-600E?","answer":"The maximum gate trigger current is 10 mA. The maximum gate trigger voltage is 2 V."},{"question":"Is BTA2008-600E suitable for 120V/240V AC control?","answer":"Yes — the 600 V off-state voltage gives ample headroom for both 120 VAC and 240 VAC mains. The 800 mA RMS on-state current handles small loads like fans, lamps, and contactor coils."},{"question":"Can I use BTA2008-600E as a replacement for MAC97A6?","answer":"The MAC97A6 is a common pin-compatible alternative in the same TO-92 footprint. Both are logic-sensitive gate triacs, but verify the gate trigger current and holding current against your drive circuit — the values may differ slightly."},{"question":"What is the pinout of BTA2008-600E TO-92?","answer":"The TO-92-3 package (TO-226-3 with formed leads) follows the standard triac pinout: pin 1 is MT1, pin 2 is MT2, pin 3 is gate. Confirm orientation against the device marking before soldering."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/nxp/BTA2008-600E412","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/nxp/BTA2008-600E412 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-12T05:30:57.745Z","lastPublished":"2026-07-12T05:30:57.745Z","indexable":true}}