{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BQ24025DRCR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"BQ24025DRCR","canonicalUrl":"https://icboms.com/texas-instruments/BQ24025DRCR","factsUrl":"https://icboms.com/api/mcp/products/BQ24025DRCR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments bqTINY™-II series, BQ24025DRCR, single-cell Li-Ion/Polymer linear charger, 500 mA max charge current, USB interface, 10-VFDFN Exposed Pad package, -40°C to 125°C junction temperature.","salesMarkdown":"## 500 mA charge ceiling — sized for small single-cell packs The BQ24025DRCR is a single-cell Li-ion/polymer linear charger from TI's bqTINY™-II family, with a maximum charge current of 500 mA. It terminates at 4.2 V, the standard full-charge voltage for most single-cell Li-ion/polymer chemistries. The input is USB-compatible, rated up to 6.5 V, so it can run directly off a 5 V USB port or a regulated wall adapter without an extra pre-regulator. The charge current is programmable via an external resistor, and the timer provides a safety backup termination. The exposed pad on the 10-VSON (3x3 mm) package helps pull heat out of the die when charging at the full 500 mA in a warm ambient. Fault protection includes over-temperature shutdown, which prevents the die from exceeding the safe junction limit if the ambient temperature rises or the thermal pad is not properly soldered to the PCB copper plane. ## Active lifecycle — no obsolescence pressure The 10-VSON package is a common footprint, and the base product number BQ24025 spans multiple current options if a design later needs a higher or lower charge rate.","metaTitle":"BQ24025DRCR Texas Instruments Li-Ion Charger, 500 mA, USB","metaDescription":"BQ24025DRCR single-cell Li-ion/polymer charger from TI bqTINY-II series. 500 mA max charge current, USB interface, 10-VSON package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Power Management (PMIC / Gate Driver)"],"specifications":{"Mfr":"Texas Instruments","Series":"bqTINY™-II","Package":"Tape & Reel (TR); Cut Tape (CT)","Interface":"USB","Mounting Type":"Surface Mount","Package / Case":"10-VFDFN Exposed Pad","Product Status":"Active","Number of Cells":"1","lifecycle_stage":"eol_hot","Fault Protection":"Over Temperature","Battery Chemistry":"Lithium Ion/Polymer","Current - Charging":"Constant - Programmable","Base Product Number":"BQ24025","Battery Pack Voltage":"4.2V","Charge Current - Max":"500mA","Operating Temperature":"-40°C~125°C(TJ)","Programmable Features":"Current, Timer","Voltage - Supply (Max)":"6.5V","Supplier Device Package":"10-VSON (3x3)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.4300","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/675c51f48f898e813e2537c7b97306cf.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can the BQ24025DRCR charge a 2-cell lithium battery?","answer":"No. The BQ24025DRCR is a single-cell charger. It terminates at 4.2 V and is designed for one Li-ion or Li-polymer cell in series. A 2-cell pack requires a charger with an 8.4 V termination voltage."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/BQ24025DRCR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/BQ24025DRCR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}