{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR35PNH6433XTMA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR35PNH6433XTMA1","canonicalUrl":"https://icboms.com/infineon/BCR35PNH6433XTMA1","factsUrl":"https://icboms.com/api/mcp/products/BCR35PNH6433XTMA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR35PNH6433XTMA1 dual pre-biased transistor, 1 NPN + 1 PNP, 50V VCEO, 100mA Ic, 150MHz fT, built-in R1=10kΩ R2=47kΩ, PG-SOT363-PO package, Tape & Reel.","salesMarkdown":"## Dual pre-biased pair with integrated bias resistors The Infineon BCR35PNH6433XTMA1 packs one NPN and one PNP pre-biased transistor in a single SOT-363 package, each with built-in 10kΩ base resistor (R1) and 47kΩ base-emitter resistor (R2). The 50V collector-emitter breakdown and 100mA maximum collector current per transistor cover low-side and high-side switching in 5V and 12V logic-level loads. The 150MHz transition frequency keeps switching edges clean for relay drivers, solenoid coils, and LED strings running below a few hundred kilohertz. ## Last Buy — secure inventory now BCR35PNH6433XTMA1 carries a Last Buy lifecycle status. This is the final ordering window before the part is discontinued. Buyers with active BOM positions should secure their lifetime buy quantity or begin qualifying a replacement. ## PG-SOT363-PO: rework and layout notes The PG-SOT363-PO package is a 6-pin SOT-363 variant with a 0.65mm pin pitch. The small body and low thermal mass (250mW power dissipation limit) mean the part reflows quickly under hot air — keep the nozzle at 300°C and pull the part within 5 seconds of the solder melting to avoid lifting the pad. The 0.65mm pitch is hand-solderable with a fine tip iron, but the small pad area demands a tack-and-reflow approach rather than dragging solder across all six pins. ## Built-in resistors simplify the BOM The pre-biased configuration (R1=10kΩ, R2=47kΩ) eliminates two external resistors per transistor from the BOM. The resistor ratio saturates the output at 300mV max with 10mA collector load.","metaTitle":"Infineon BCR35PNH6433XTMA1 dual pre-biased transistor, 50V","metaDescription":"Infineon BCR35PNH6433XTMA1 dual NPN/PNP pre-biased transistor. 50V VCEO, 100mA Ic, 150MHz fT. Built-in 10kΩ/47kΩ resistors. Last Buy status — order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Last Buy","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR)","Power - Max":"250mW","Mounting Type":"Surface Mount","Package / Case":"6-VSSOP, SC-88, SOT-363","Product Status":"Not For New Designs","Transistor Type":"1 NPN, 1 PNP - Pre-Biased (Dual)","lifecycle_stage":"eol_hot","Base Product Number":"BCR35","Resistor - Base (R1)":"10kOhms","Frequency - Transition":"150MHz","Supplier Device Package":"PG-SOT363-PO","Resistor - Emitter Base (R2)":"47kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100mA","Current - Collector Cutoff (Max)":"-","DC Current Gain (hFE) (Min) @ Ic, Vce":"70 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.0856","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/12024c6ede9aeb6dac4cdbdc097bb64f.pdf","sourceUrl":null},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR35PNH6433XTMA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR35PNH6433XTMA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}