{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR196WE6327","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR196WE6327","canonicalUrl":"https://icboms.com/infineon/BCR196WE6327","factsUrl":"https://icboms.com/api/mcp/products/BCR196WE6327","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR196WE6327 PNP pre-biased transistor, 50 V Vce, 70 mA Ic, 150 MHz fT, integrated R1=47 kΩ, R2=22 kΩ, SC-70/SOT-323 package, surface mount, 250 mW power dissipation.","salesMarkdown":"## Pre-biased PNP — one component, two resistors saved The Infineon BCR196WE6327 is a PNP pre-biased transistor in a three-pin SC-70 / SOT-323 package. It integrates a 47 kΩ base resistor (R1) and a 22 kΩ emitter-base resistor (R2), which eliminates two external passives from the BOM and shrinks the footprint for dense SMT layouts. Collector-emitter breakdown is rated at 50 V, maximum collector current at 70 mA, and the device dissipates up to 250 mW. With a transition frequency of 150 MHz, it handles small-signal switching and interface-level shifting in 3.3 V to 24 V systems — think relay coils, LED indicators, or logic-level translation where a single PNP stage with built-in bias cleans up the board. ## 50 V breakdown, 70 mA collector — where the envelope lands The 50 V Vce(max) and 70 mA Ic(max) define the safe operating area for low-current switching and linear applications. Saturation voltage is 300 mV at 500 µA base drive and 10 mA collector current, which keeps conduction loss low in saturated switching. DC current gain minimum is 50 at 5 mA, 5 V — adequate for driving loads from a microcontroller GPIO through the integrated base resistor. Off-state collector cutoff is 100 nA max, so leakage won't load a high-impedance node in standby. For procurement, that removes the urgency of a last-time-buy calculation and supports multi-year production commitments.","metaTitle":"Infineon BCR196WE6327 PNP Pre-Biased Transistor, 50 V, 70 mA","metaDescription":"Infineon BCR196WE6327 PNP pre-biased transistor in SC-70/SOT-323. 50 V Vce, 70 mA Ic, 150 MHz fT, integrated 47 kΩ / 22 kΩ resistors.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Bulk","Power - Max":"250 mW","Mounting Type":"Surface Mount","Package / Case":"SC-70, SOT-323","Product Status":"Active","Transistor Type":"PNP - Pre-Biased","lifecycle_stage":"eol_hot","Resistor - Base (R1)":"47 kOhms","Frequency - Transition":"150 MHz","Supplier Device Package":"PG-SOT323-3","Resistor - Emitter Base (R2)":"22 kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"70 mA","Current - Collector Cutoff (Max)":"100nA (ICBO)","DC Current Gain (hFE) (Min) @ Ic, Vce":"50 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.0200","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/bda8efdf785e24ea416f268259d6274c.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What are the integrated resistor values for BCR196WE6327?","answer":"The base resistor (R1) is 47 kΩ and the emitter-base resistor (R2) is 22 kΩ, both integrated into the PNP pre-biased transistor die."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR196WE6327","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR196WE6327 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}