{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR192WH6327","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR192WH6327","canonicalUrl":"https://icboms.com/infineon/BCR192WH6327","factsUrl":"https://icboms.com/api/mcp/products/BCR192WH6327","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR192WH6327 PNP pre-biased transistor, 50 V Vce, 100 mA Ic, 250 mW, 200 MHz ft, built-in R1=22 kΩ, R2=47 kΩ, SC-70/SOT-323, surface mount, PG-SOT323-3-1 package.","salesMarkdown":"## Pre-biased PNP in a small SOT-323 — what it saves you The Infineon BCR192WH6327 is a PNP pre-biased transistor — it integrates two bias resistors (22 kΩ base resistor R1 and 47 kΩ emitter-base resistor R2) inside the same SOT-323 package that would otherwise hold just the bare die. That means one component replaces three (transistor plus two resistors), shrinking the pick-and-place count and the board area. It is rated for 50 V collector-emitter breakdown and 100 mA continuous collector current, with a transition frequency of 200 MHz. ## 250 mW power dissipation — what it means on a small footprint The 250 mW power limit is the total the SOT-323 package can shed to ambient without a thermal pad. At 100 mA collector current and a Vce(sat) of 300 mV, the conduction loss is only 30 mW, so the headroom is generous for switching loads. But if the transistor is used in linear mode (e.g., as a slow-switch or level shifter with significant Vce), the 250 mW ceiling comes into play quickly — derate above 25 °C per the datasheet curve.","metaTitle":"Infineon BCR192WH6327 PNP Pre-Biased Transistor, 50 V","metaDescription":"Infineon BCR192WH6327 PNP pre-biased transistor. 50 V Vce, 100 mA Ic, 250 mW. Built-in 22 kΩ base and 47 kΩ emitter-base resistors. Active, SOT-323.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Bulk","Power - Max":"250 mW","Mounting Type":"Surface Mount","Package / Case":"SC-70, SOT-323","Product Status":"Active","Transistor Type":"PNP - Pre-Biased","lifecycle_stage":"eol_hot","Resistor - Base (R1)":"22 kOhms","Frequency - Transition":"200 MHz","Supplier Device Package":"PG-SOT323-3-1","Resistor - Emitter Base (R2)":"47 kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100 mA","Current - Collector Cutoff (Max)":"100nA (ICBO)","DC Current Gain (hFE) (Min) @ Ic, Vce":"70 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.0400","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/621bd2a9b601c41be342fd776ca66190.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the BCR192WH6327 power rating?","answer":"The maximum power dissipation is 250 mW."},{"question":"What is the replacement for BCR192WH6327?","answer":"No official replacement is listed — the part is active and in production. For a pin-compatible alternative, look at other PNP pre-biased transistors in SOT-323 from Infineon or Nexperia with the same resistor divider ratio (22 kΩ / 47 kΩ). Verify the resistor values and package match your layout."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR192WH6327","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR192WH6327 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}