{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR192E6785HTSA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR192E6785HTSA1","canonicalUrl":"https://icboms.com/infineon/BCR192E6785HTSA1","factsUrl":"https://icboms.com/api/mcp/products/BCR192E6785HTSA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR192E6785HTSA1 PNP pre-biased transistor, Automotive AEC-Q101, 50 V Vce, 100 mA Ic, 200 MHz, 22 kΩ / 47 kΩ bias resistors, PG-SOT23 package.","salesMarkdown":"## Last Buy — plan your BOM now The Infineon BCR192E6785HTSA1 is a PNP pre-biased transistor in the Automotive AEC-Q101 series, rated for 50 V collector-emitter breakdown and 100 mA continuous collector current. It integrates a 22 kΩ base resistor and a 47 kΩ emitter-base resistor, reducing external component count in switching and driver stages. The 200 MHz transition frequency suits it for low-frequency switching and signal conditioning in automotive modules such as ECU outputs, relay drivers, and sensor interfaces. This part carries a Last Buy lifecycle status, meaning the manufacturer has scheduled end-of-production. ## PG-SOT23 package — hand-solderable Housed in a PG-SOT23 (SOT-23-3) surface-mount package, this transistor is hand-solderable with a fine-tip iron and a steady hand. The three-pin layout is standard for small-signal transistors, so PCB footprints are widely available in EDA libraries. Maximum power dissipation is 200 mW, typical for this package size — keep the junction temperature in check if driving near the 100 mA limit continuously. ## AEC-Q101 — built for the engine bay The Automotive AEC-Q101 qualification means this part has passed stress tests for temperature cycling, humidity, and high-temperature reverse bias. It is rated for the under-hood and chassis-domain environments where commercial-grade parts would fail. The 100 nA maximum collector cutoff current (ICBO) ensures low leakage at elevated temperatures, a critical parameter for automotive sensor inputs and wake-up circuits.","metaTitle":"Infineon BCR192E6785HTSA1 PNP Pre-Biased Transistor","metaDescription":"Infineon BCR192E6785HTSA1 PNP pre-biased transistor, AEC-Q101 qualified, 50 V Vce, 100 mA Ic, 200 MHz fT.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Last Buy","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"Automotive, AEC-Q101","Package":"Tape & Reel (TR)","Power - Max":"200 mW","Mounting Type":"Surface Mount","Package / Case":"TO-236-3, SC-59, SOT-23-3","Product Status":"Last Time Buy","Transistor Type":"PNP - Pre-Biased","lifecycle_stage":"eol_hot","Resistor - Base (R1)":"22 kOhms","Frequency - Transition":"200 MHz","Supplier Device Package":"PG-SOT23","Resistor - Emitter Base (R2)":"47 kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100 mA","Current - Collector Cutoff (Max)":"100nA (ICBO)","DC Current Gain (hFE) (Min) @ Ic, Vce":"70 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.0200","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/2f266ffb06d4d2719ca37cd9899bd424.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is BCR192E6785HTSA1 obsolete?","answer":"The manufacturer lists this part as Last Buy, meaning production is ending. It is not yet fully discontinued, but remaining stock is limited. Orders are fulfilled on a quoted basis against an RFQ."},{"question":"What is the replacement for BCR192E6785HTSA1?","answer":"For a pin-compatible alternative within the same Infineon pre-biased PNP family, look for parts with the same SOT-23 footprint and similar resistor values (22 kΩ base, 47 kΩ emitter-base). Verify the Vce and Ic ratings match your design."},{"question":"Can I use BCR192E6785HTSA1 in automotive applications?","answer":"Yes. The BCR192E6785HTSA1 is part of the Automotive AEC-Q101 series, qualified for automotive-grade stress tests. It is suitable for ECU outputs, relay drivers, and sensor interfaces in under-hood and chassis environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR192E6785HTSA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR192E6785HTSA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}