{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR116SH6327XTSA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR116SH6327XTSA1","canonicalUrl":"https://icboms.com/infineon/BCR116SH6327XTSA1","factsUrl":"https://icboms.com/api/mcp/products/BCR116SH6327XTSA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR116SH6327XTSA1, dual NPN pre-biased transistor array, 50V VCEO, 100mA IC, 150MHz fT, 4.7kΩ base / 47kΩ emitter-base resistors, PG-SOT363-PO package, Tape & Reel.","salesMarkdown":"## Dual pre-biased NPN in a SOT-363 — what you get The Infineon BCR116SH6327XTSA1 packs two NPN transistors with integrated bias resistors into a single PG-SOT363-PO package. Each transistor has a 4.7 kΩ base resistor (R1) and a 47 kΩ emitter-base resistor (R2), so you drop the two external resistors per channel from the BOM. Collector-emitter breakdown is rated at 50 V, continuous collector current at 100 mA, and the DC current gain minimum is 70 at 5 mA, 5 V. Transition frequency hits 150 MHz — fine for switching loads up to a few MHz, not for RF. ## NRND — plan your BOM move now That means it is still available for existing production runs, but the manufacturer is signalling a future end-of-life. ## Switching performance at low drive current The Vce saturation max of 300 mV at 500 µA base drive and 10 mA collector current means this part switches cleanly from logic-level outputs without extra base current margin. At 100 mA the saturation voltage will rise, but for typical loads under 50 mA the conduction loss stays under 30 mW per transistor — well within the 250 mW total package dissipation limit.","metaTitle":"Infineon BCR116SH6327XTSA1 Dual NPN Pre-Biased Transistor","metaDescription":"Infineon BCR116SH6327XTSA1 dual NPN pre-biased transistor in SOT-363. 50V VCEO, 100mA IC, 4.7kΩ / 47kΩ bias resistors.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"NRND","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR)","Power - Max":"250mW","Mounting Type":"Surface Mount","Package / Case":"6-VSSOP, SC-88, SOT-363","Product Status":"Not For New Designs","Transistor Type":"2 NPN - Pre-Biased (Dual)","lifecycle_stage":"eol_hot","Base Product Number":"BCR116","Resistor - Base (R1)":"4.7kOhms","Frequency - Transition":"150MHz","Supplier Device Package":"PG-SOT363-PO","Resistor - Emitter Base (R2)":"47kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100mA","Current - Collector Cutoff (Max)":"-","DC Current Gain (hFE) (Min) @ Ic, Vce":"70 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.0848","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://www.infineon.com/dgdl/bcr116series.pdf?folderId=db3a30431400ef68011406f3ddb1012e&fileId=db3a30431428a37301143f60ae880285","sourceUrl":null},"ai":{"faq":[{"question":"Is BCR116SH6327XTSA1 obsolete?","answer":"It is not yet discontinued, but the manufacturer is phasing it out. Existing production can continue; new designs should select a pin-compatible alternative."},{"question":"What is the replacement for BCR116SH6327XTSA1?","answer":"Infineon does not publish a direct successor for this exact order code. Look at other BCR116 variants in the same SOT-363 package — the base product number BCR116 defines the 4.7 kΩ / 47 kΩ resistor network, and different suffix codes may share the same die with different packaging or qualification levels. A cross-reference search against the BCR116 base number will surface alternatives for dual-sourcing."},{"question":"What is the maximum collector current of BCR116?","answer":"The continuous collector current (Ic) max is 100 mA per transistor."},{"question":"What are the key differences between BCR116 and BCR135?","answer":"Both are dual NPN pre-biased transistors in SOT-363, but the bias resistor values differ. BCR116 uses 4.7 kΩ base / 47 kΩ emitter-base; BCR135 uses 10 kΩ base / 47 kΩ emitter-base. The BCR116 therefore requires less base current from the driving stage for the same collector current, which matters when the drive comes from a low-current logic output."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR116SH6327XTSA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR116SH6327XTSA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}