{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR10PNH6327XTSA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR10PNH6327XTSA1","canonicalUrl":"https://icboms.com/infineon/BCR10PNH6327XTSA1","factsUrl":"https://icboms.com/api/mcp/products/BCR10PNH6327XTSA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR10PNH6327XTSA1 dual pre-biased transistor, 1 NPN + 1 PNP, 50V VCEO, 100mA Ic, 10kΩ base and emitter resistors, 130MHz fT, SOT-363 package.","salesMarkdown":"## Dual pre-biased transistor in a SOT-363 The Infineon BCR10PNH6327XTSA1 packs one NPN and one PNP pre-biased transistor in a single SOT-363 package, each with integrated 10kΩ base and base-emitter resistors. That means two switching or driver channels in one footprint with no external bias components. Collector current is rated 100mA maximum, collector-emitter breakdown at 50V, and transition frequency hits 130MHz — fast enough for low-frequency switching and level-shifting up to a few MHz. ## Last-time-buy — plan the BOM now This part carries a Last Buy status from Infineon. If your BOM depends on it, the window for placing final orders is open now. After the LTB date passes, the only channel will be surplus and broker inventory — which is where we source it today, quoted against your RFQ with current availability confirmed at quote time. The 10kΩ base resistor sets the on-drive current: with a 5V logic signal, base current sits around 400µA, enough to saturate the transistor at 10mA collector current with a Vce(sat) of 300mV typical. The 10kΩ base-emitter resistor ensures a clean off-state by shunting leakage — useful in noisy environments or when the drive source goes high-impedance. Power dissipation is capped at 250mW total for the dual package, so derate if both channels run near 100mA simultaneously.","metaTitle":"BCR10PNH6327XTSA1 Dual Pre-Biased Transistor, 50V, 100mA","metaDescription":"Infineon BCR10PNH6327XTSA1 dual NPN/PNP pre-biased transistor. 50V VCEO, 100mA Ic, 10kΩ resistors, 130MHz fT. SOT-363 package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Last Buy","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Power - Max":"250mW","Mounting Type":"Surface Mount","Package / Case":"6-VSSOP, SC-88, SOT-363","Product Status":"Last Time Buy","Transistor Type":"1 NPN, 1 PNP - Pre-Biased (Dual)","lifecycle_stage":"eol_hot","Base Product Number":"BCR10PN","Resistor - Base (R1)":"10kOhms","Frequency - Transition":"130MHz","Supplier Device Package":"PG-SOT363-PO","Resistor - Emitter Base (R2)":"10kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100mA","Current - Collector Cutoff (Max)":"-","DC Current Gain (hFE) (Min) @ Ic, Vce":"30 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.4500","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/a613f232d8204b51789d3e442eb91bb6.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is BCR10PNH6327XTSA1 obsolete or last time buy?","answer":"Yes, Infineon has marked this part as Last Buy. That means it is in the final ordering phase and will not be manufactured after the LTB window closes. We source it through independent distribution — submit an RFQ for current availability and pricing."},{"question":"What is the replacement for BCR10PNH6327XTSA1?","answer":"Infineon has not published a direct pin-compatible successor for this part. If you need a drop-in replacement, check the BCR10PN family for similar pre-biased dual transistors in SOT-363 — but verify the resistor values and ratings against your design. We can also help cross-reference against available stock on request."},{"question":"What are the specifications of BCR10PNH6327XTSA1?","answer":"It is a dual NPN/PNP pre-biased transistor with 50V VCEO, 100mA maximum collector current, 10kΩ base and base-emitter resistors, 130MHz transition frequency, and 250mW total power dissipation. Housed in a SOT-363 (PG-SOT363-PO) surface-mount package."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR10PNH6327XTSA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR10PNH6327XTSA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}