{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR108SH6327XTSA1","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR108SH6327XTSA1","canonicalUrl":"https://icboms.com/infineon/BCR108SH6327XTSA1","factsUrl":"https://icboms.com/api/mcp/products/BCR108SH6327XTSA1","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR108SH6327XTSA1 dual NPN pre-biased transistor array, 50V Vceo, 100mA Ic, 170MHz ft, 2.2kΩ base / 47kΩ emitter resistors, PG-SOT363-PO package, Tape & Reel.","salesMarkdown":"## Dual pre-biased NPN array in a SOT-363 — the field-swap angle The Infineon BCR108SH6327XTSA1 packs two NPN transistors with integrated bias resistors into a single PG-SOT363-PO package. Each transistor has a 2.2 kΩ base resistor (R1) and a 47 kΩ emitter-base resistor (R2), so you drop the external resistor pair for each channel. That saves board space and cuts the component count — handy when you are reworking a cramped board on site and do not want to hunt for two extra 0402s. Rated for 50 V collector-emitter breakdown and 100 mA continuous collector current, with a transition frequency of 170 MHz. The 250 mW power dissipation ceiling means it is for signal-level switching and drive, not power stages. Saturation voltage is 300 mV at 500 µA base and 10 mA collector — clean enough for logic-level interface work. This part carries a Last Buy lifecycle status. That means Infineon has announced end-of-life and the final ordering window is open — once it closes, the part will no longer be manufactured. The closest path is to look at the broader BCR108 family or a generic dual pre-biased NPN array in SOT-363 from another vendor — but pin compatibility and resistor values need checking against your layout. The 2.2 kΩ base and 47 kΩ emitter resistor ratio is specific; a drop-in substitute must match that divider.","metaTitle":"Infineon BCR108SH6327XTSA1 dual NPN pre-biased transistor","metaDescription":"Infineon BCR108SH6327XTSA1 dual NPN pre-biased transistor array. 50V Vceo, 100mA Ic, 170MHz ft, built-in 2.2kΩ base and 47kΩ emitter resistors.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Last Buy","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR)","Power - Max":"250mW","Mounting Type":"Surface Mount","Package / Case":"6-VSSOP, SC-88, SOT-363","Product Status":"Last Time Buy","Transistor Type":"2 NPN - Pre-Biased (Dual)","lifecycle_stage":"eol_hot","Base Product Number":"BCR108","Resistor - Base (R1)":"2.2kOhms","Frequency - Transition":"170MHz","Supplier Device Package":"PG-SOT363-PO","Resistor - Emitter Base (R2)":"47kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100mA","Current - Collector Cutoff (Max)":"-","DC Current Gain (hFE) (Min) @ Ic, Vce":"70 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.0856","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/7495c3884ac1e791d30a362fa78f30ce.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is BCR108SH6327XTSA1 obsolete?","answer":"The lifecycle status is Last Buy, not fully obsolete. Infineon has announced end-of-life and the final purchase window is active. Once that window closes, the part will be discontinued and only available through surplus or broker channels."},{"question":"What is the exact replacement for BCR108SH6327XTSA1?","answer":"A replacement would need to be a dual NPN pre-biased transistor array in SOT-363 with matching 2.2 kΩ base and 47 kΩ emitter resistors. Check the BCR108 family or cross-reference to a generic equivalent — verify pinout and resistor divider before committing a board spin."},{"question":"What are the specifications of BCR108SH6327XTSA1?","answer":"It is a dual NPN pre-biased transistor array in a PG-SOT363-PO package. Key ratings: 50 V Vceo, 100 mA Ic max, 170 MHz transition frequency, 250 mW power dissipation. Built-in resistors are 2.2 kΩ base (R1) and 47 kΩ emitter-base (R2). DC current gain (hFE) is 70 minimum at 5 mA, 5 V. Saturation voltage is 300 mV max at 500 µA base, 10 mA collector."},{"question":"What is the lead time for BCR108SH6327XTSA1?","answer":"Because this part is on Last Buy, lead times may be constrained by remaining factory inventory — submit an RFQ for current lead time and available quantity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR108SH6327XTSA1","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR108SH6327XTSA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}