{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR 196L3 E6327","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR-196L3-E6327","canonicalUrl":"https://icboms.com/infineon/BCR-196L3-E6327","factsUrl":"https://icboms.com/api/mcp/products/BCR%20196L3%20E6327","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR 196L3 E6327, PNP - Pre-Biased, 50 V, 70 mA, 150 MHz, 47 kOhms R1, 22 kOhms R2, PG-TSLP-3-4, Surface Mount.","salesMarkdown":"## Pre-biased PNP in an ultra-small footprint The Infineon BCR 196L3 E6327 is a PNP pre-biased transistor that integrates a 47 kOhm base resistor (R1) and a 22 kOhm emitter-base resistor (R2) in a single SOT-883 package (PG-TSLP-3-4). This eliminates two external resistors from the BOM, saving board area in space-constrained designs such as portable electronics, load switches, and interface circuits where discrete transistor biasing would otherwise consume extra PCB real estate. The 150 MHz transition frequency is fast enough for most logic-level switching below a few megahertz. Saturation voltage is specified at 300 mV maximum at 500 µA base current and 10 mA collector current, giving reasonable on-state efficiency for a small-signal device. Total power dissipation is rated at 250 mW, which in the SOT-883 package means thermal management is straightforward as long as the ambient stays within typical industrial or consumer limits. The pre-biased configuration means the base drive is set by the ratio of R1 to R2 — the 47 kOhm / 22 kOhm divider produces a predictable turn-on threshold that simplifies input drive calculations.","metaTitle":"BCR 196L3 E6327 PNP Pre-Biased Transistor, 50V, 70mA","metaDescription":"Infineon BCR 196L3 E6327 PNP pre-biased transistor with 47kΩ base resistor, 22kΩ emitter-base resistor. 50V Vce, 70mA Ic, 150MHz fT.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR)","Power - Max":"250 mW","Mounting Type":"Surface Mount","Package / Case":"SC-101, SOT-883","Transistor Type":"PNP - Pre-Biased","lifecycle_stage":"eol_hot","Base Product Number":"BCR 196","Resistor - Base (R1)":"47 kOhms","Frequency - Transition":"150 MHz","Supplier Device Package":"PG-TSLP-3-4","Resistor - Emitter Base (R2)":"22 kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"70 mA","Current - Collector Cutoff (Max)":"100nA (ICBO)","DC Current Gain (hFE) (Min) @ Ic, Vce":"50 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/61844e5c86eb230722d11e6834e04e90.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/BCR%20196L3%20E6327/alternatives.json"},"ai":{"faq":[{"question":"What are the resistor values R1 and R2 in BCR 196L3 E6327?","answer":"The base resistor R1 is 47 kOhms and the emitter-base resistor R2 is 22 kOhms. These are integrated on-chip, so no external bias resistors are needed."},{"question":"What is a direct replacement for BCR 196L3 E6327?","answer":"Infineon does not list a direct pin-compatible replacement for this exact order code. The pre-biased resistor values (47 kOhms / 22 kOhms) and SOT-883 package are specific to this variant. For an alternative, check the BCR 196 family base number — other members share the same die but differ in R1/R2 ratios or package options."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR-196L3-E6327","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR-196L3-E6327 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}