{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR 192T E6327","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR-192T-E6327","canonicalUrl":"https://icboms.com/infineon/BCR-192T-E6327","factsUrl":"https://icboms.com/api/mcp/products/BCR%20192T%20E6327","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR 192 series PNP pre-biased transistor, SC-75 / SOT-416 package, 50 V Vce, 100 mA Ic, 250 mW, 200 MHz ft, with integrated 22 kΩ base resistor and 47 kΩ base-emitter resistor.","salesMarkdown":"## Integrated bias resistors save a resistor pair per switching node The BCR 192T E6327 is a PNP pre-biased transistor from Infineon that integrates the bias network directly into the silicon: a 22 kΩ series base resistor (R1) and a 47 kΩ resistor (R2) between base and emitter. This eliminates two discrete resistors per transistor from the BOM and shrinks the footprint to a single SC-75 (SOT-416) surface-mount package. With a collector current rating of 100 mA and a collector-emitter breakdown voltage of 50 V, it handles the typical switching loads in low-power DC-DC converters, relay drivers, and logic-level interface circuits. The 200 MHz transition frequency confirms it is fast enough for PWM frequencies well into the hundreds of kilohertz. Maximum power dissipation is 250 mW — a realistic ceiling in the small SC-75 package. For continuous operation near that limit, pay attention to PCB copper area and ambient temperature; the junction-to-ambient thermal resistance of this package is modest, so a 100 mA load at a Vce of 2.5 V already consumes the full 250 mW budget. ## Switching performance at 5 mA bias point Minimum DC current gain is 70 at 5 mA collector current and 5 V Vce — a gain high enough that a 100 µA base drive from a logic output saturates the transistor comfortably. The Vce saturation voltage is 300 mV maximum at 500 µA base current and 10 mA collector current, which keeps conduction losses low in saturated switching. Collector cutoff current is 100 nA maximum — negligible in most designs, but worth noting if the load is a high-impedance input that could be pulled by microamp leakage at elevated temperature. This part is still in regular production and available through Infineon's distribution network, which means no date-code scrambling or premium pricing for a discontinued line.","metaTitle":"BCR 192T E6327 PNP Pre-Biased Transistor, 50 V, 100 mA","metaDescription":"Infineon BCR 192T E6327 PNP pre-biased transistor with integrated 22 kΩ / 47 kΩ resistors. 50 V Vce, 100 mA Ic, 200 MHz ft. SC-75 SMD package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR)","Power - Max":"250 mW","Mounting Type":"Surface Mount","Package / Case":"SC-75, SOT-416","Transistor Type":"PNP - Pre-Biased","lifecycle_stage":"eol_hot","Base Product Number":"BCR 192","Resistor - Base (R1)":"22 kOhms","Frequency - Transition":"200 MHz","Supplier Device Package":"PG-SC-75","Resistor - Emitter Base (R2)":"47 kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100 mA","Current - Collector Cutoff (Max)":"100nA (ICBO)","DC Current Gain (hFE) (Min) @ Ic, Vce":"70 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/4fe5c0ab1d6c87cb3005fcf44fa5f1fe.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What are the resistor values (R1, R2) of BCR 192T E6327?","answer":"The integrated base resistor (R1) is 22 kΩ and the base-emitter resistor (R2) is 47 kΩ. These values set the on-state base current for a given input voltage and determine the turn-off speed through the base-emitter shunt."},{"question":"What is the maximum collector current (Ic) of BCR 192T E6327?","answer":"The maximum continuous collector current is 100 mA. Pulse currents can be higher, but the 250 mW power dissipation limit and the thermal capability of the SC-75 package govern the practical safe operating area."},{"question":"Is BCR 192T E6327 compatible with BCR 192?","answer":"BCR 192T E6327 shares the same base product number (BCR 192) and the same pre-biased resistor values. The 'T' suffix typically denotes a specific package or reel variant within the family. It is functionally compatible with other BCR 192 variants in the same SC-75 package."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR-192T-E6327","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR-192T-E6327 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}