{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR 189T E6327","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR-189T-E6327","canonicalUrl":"https://icboms.com/infineon/BCR-189T-E6327","factsUrl":"https://icboms.com/api/mcp/products/BCR%20189T%20E6327","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR 189T E6327 PNP pre-biased digital transistor, 100 mA collector current, 50 V Vce, 200 MHz fT, 250 mW, SC-75 SOT-416 surface mount.","salesMarkdown":"## What this PNP pre-biased transistor does — and the mistake it saves you from The BCR 189T E6327: The Infineon BCR 189T is a PNP pre-biased transistor with a 22 kOhm base resistor built in, so you skip the external resistor pair that a discrete PNP would need for a simple switch. Rated for 100 mA collector current and 50 V collector-emitter breakdown, it handles low-side switching of relays, LEDs, or logic-level loads in compact designs. The 200 MHz transition frequency means it switches cleanly well into the low-MHz range, fine for GPIO-driven loads or signal inversion. ## The 250 mW power ceiling — what it means on a small SC-75 footprint With a 250 mW maximum power dissipation and a SC-75 (SOT-416) package, this part is sized for signal-level switching, not continuous high-current drive. At 100 mA collector current and a typical Vce(sat) of 300 mV at 500 µA base drive, the dissipation stays well under the limit for pulsed or low-duty-cycle loads. If your load draws 100 mA steady, check the junction temperature — the small package has limited copper to sink heat, and the 250 mW ceiling is the total, not per-pin.","metaTitle":"Infineon BCR 189T E6327 PNP Pre-Biased Transistor, 100 mA","metaDescription":"Infineon BCR 189T E6327 PNP pre-biased digital transistor. 100 mA collector current, 50 V Vce, 200 MHz fT, 250 mW. SC-75 SOT-416 surface mount. Active","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR)","Power - Max":"250 mW","Mounting Type":"Surface Mount","Package / Case":"SC-75, SOT-416","Transistor Type":"PNP - Pre-Biased","lifecycle_stage":"eol_hot","Base Product Number":"BCR 189","Resistor - Base (R1)":"22 kOhms","Frequency - Transition":"200 MHz","Supplier Device Package":"PG-SC75-3D","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100 mA","Current - Collector Cutoff (Max)":"100nA (ICBO)","DC Current Gain (hFE) (Min) @ Ic, Vce":"120 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/ffd0b80f23e6a21c40d48bf1028b05ce.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is BCR 189T E6327 lead-free and RoHS compliant?","answer":"The BCR 189T E6327 is supplied in Tape & Reel packaging and is part of Infineon's standard RoHS-compliant product line. The 'E6327' suffix typically indicates lead-free and RoHS compliance for Infineon parts, though the evidence does not explicitly state the certification — confirm with the datasheet or your Infineon contact for formal compliance documentation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR-189T-E6327","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR-189T-E6327 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}