{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BCR 183 B6327","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"BCR-183-B6327","canonicalUrl":"https://icboms.com/infineon/BCR-183-B6327","factsUrl":"https://icboms.com/api/mcp/products/BCR%20183%20B6327","rawCanonicalId":null},"summary":{"shortDescription":"Infineon BCR 183 B6327, PNP Pre-Biased, 50 V Vce, 100 mA Ic, 10 kOhm base and emitter-base resistors, 200 MHz ft, 200 mW, SOT-23-3.","salesMarkdown":"## Pre-biased PNP — the BOM simplification it was designed for The BCR 183 B6327 is a PNP pre-biased digital transistor from Infineon, integrating a 10 kOhm base resistor (R1) and a 10 kOhm emitter-base resistor (R2) in a single SOT-23-3 package. It replaces the discrete transistor plus two external resistors, saving board space and reducing component count in switching and interface circuits. The 200 mW maximum power dissipation sets a practical ceiling on continuous collector current at a given Vce. At 300 mV saturation (typical at 10 mA), the dissipation is only 3 mW, leaving ample headroom. But driving the full 100 mA at a Vce of 2 V would hit 200 mW — so the load voltage drop and duty cycle need checking if you are switching near the current limit. ## Obsolete — filling the BOM line now It is no longer in production, so new designs should avoid it. There is no official Infineon successor listed for this exact order code; a pin-compatible pre-biased PNP in SOT-23 with 10 kOhm resistors from another manufacturer may serve as a drop-in, but verify the resistor ratio and Vce(sat) against your operating point before committing the board.","metaTitle":"BCR 183 B6327 PNP Pre-Biased Transistor, 50V 100mA SOT-23","metaDescription":"BCR 183 B6327 PNP pre-biased digital transistor, 50V Vce, 100mA Ic, 10kOhm bias resistors, 200mW, SOT-23. Request quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"Infineon Technologies","Series":"-","Package":"Tape & Reel (TR)","Power - Max":"200 mW","Mounting Type":"Surface Mount","Package / Case":"TO-236-3, SC-59, SOT-23-3","Product Status":"Obsolete","Transistor Type":"PNP - Pre-Biased","lifecycle_stage":"eol_hot","Base Product Number":"BCR 183","Resistor - Base (R1)":"10 kOhms","Frequency - Transition":"200 MHz","Supplier Device Package":"PG-SOT23","Resistor - Emitter Base (R2)":"10 kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 500µA, 10mA","Current - Collector (Ic) (Max)":"100 mA","Current - Collector Cutoff (Max)":"100nA (ICBO)","DC Current Gain (hFE) (Min) @ Ic, Vce":"30 @ 5mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/656828cefb776bb120a4458d21f6e00f.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/BCR%20183%20B6327/alternatives.json"},"ai":{"faq":[{"question":"What is the replacement for BCR 183 B6327?","answer":"Infineon does not list an official successor for this exact order code. A pin-compatible pre-biased PNP in SOT-23 with 10 kOhm base and emitter-base resistors from another manufacturer may work as a drop-in, but confirm the resistor ratio and Vce(sat) at your operating current before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/BCR-183-B6327","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/BCR-183-B6327 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}